Thingiverse
Samsung S10 Bike Mount by KimRechnagel
by Thingiverse
Last crawled date: 4 years, 10 months ago
MOVING TO: https://www.prusaprinters.org/social/98149-kimrechnagel/prints
Update: As the Fusion 360 team has decided to remove export to all other formats than STL, then I have included the design in .f3d and .step format. Good luck.
I needed a phone mount for my Radon Mountainbike so I decided to build it from scratch as a Fusion 360 training task.
The pictures shows the first prototype printed in 0.30.
The mount fits a Samsung S10 with TPU case perfectly.
The attachment radius is 35mm.
Top/bottom layer: 3
The clearance from the attachment to the mount is 10 mm.
The screw size on the three screws on the phone mount part must not be longer than M3 13mm. The other M3 screws can be longer.
Use support enforcers for the middle part of the attachment parts as shown in the picture (Prusaslicer).
Update: As the Fusion 360 team has decided to remove export to all other formats than STL, then I have included the design in .f3d and .step format. Good luck.
I needed a phone mount for my Radon Mountainbike so I decided to build it from scratch as a Fusion 360 training task.
The pictures shows the first prototype printed in 0.30.
The mount fits a Samsung S10 with TPU case perfectly.
The attachment radius is 35mm.
Top/bottom layer: 3
The clearance from the attachment to the mount is 10 mm.
The screw size on the three screws on the phone mount part must not be longer than M3 13mm. The other M3 screws can be longer.
Use support enforcers for the middle part of the attachment parts as shown in the picture (Prusaslicer).