Thingiverse
Sampling Cassette Holder
by Thingiverse
Last crawled date: 6 years ago
3D printed version of the otherwise expensive universal cassette and cyclone holder. Allows cassettes and cyclones to be attached to a worker's collar or sample location. Compatible with 37mm cassettes, 25mm cassettes, and aluminum cyclones.
I had cassette holders continually breaking but most parts were still usable. Instead of ordering another expensive part, I modelled and printed a new holder to change the springs and tubing over too. Still requires a clip but there is a slot modelled in (rather than rivet as in the original).
I printed in PETG for durability and resistance.
This is a $0.60 solution to $60 part.
I had cassette holders continually breaking but most parts were still usable. Instead of ordering another expensive part, I modelled and printed a new holder to change the springs and tubing over too. Still requires a clip but there is a slot modelled in (rather than rivet as in the original).
I printed in PETG for durability and resistance.
This is a $0.60 solution to $60 part.