Thingiverse
SainSmart 7 in LCD Enclosure by techappsgoodson
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is an enclosure for the SainSmart 7" touch screen LCD, Commonly available here: http://goo.gl/hvdesL. This has room for all 3 of the boards that come with it, provides access to the ports on the top, and you can access the buttons via the back panel.
The holes in the corners are for 4mm magnets which can be purchased here: http://goo.gl/KbKk40. They may not be needed as it stays together pretty well just using friction.
Note that in the pictures my back plate had some measurements that were wrong. I corrected them in the STL file but I ran out of filament so I couldn't print another.
The holes in the corners are for 4mm magnets which can be purchased here: http://goo.gl/KbKk40. They may not be needed as it stays together pretty well just using friction.
Note that in the pictures my back plate had some measurements that were wrong. I corrected them in the STL file but I ran out of filament so I couldn't print another.