Thingiverse
Saddle Mudguard by L00TW1CK
by Thingiverse
Last crawled date: 5 years, 3 months ago
As there are many clip on Mudguards for bigger Printers,
I made one that fits (turned by 45°) on an 220 by 220 mm Buildplate.
Adjust the height by your needs ( The stl has 2mm height).
I´ve printed mine with 1mm Thickness and that works very well.
After printing i heated it up with an Hairdryer to bend it slightly in the Middle.
Just clip them under your Saddle and have an dry Butt ;-)
Happy Cycling :-D
I made one that fits (turned by 45°) on an 220 by 220 mm Buildplate.
Adjust the height by your needs ( The stl has 2mm height).
I´ve printed mine with 1mm Thickness and that works very well.
After printing i heated it up with an Hairdryer to bend it slightly in the Middle.
Just clip them under your Saddle and have an dry Butt ;-)
Happy Cycling :-D