Runcam Split 4 Housing for Sonicmodell AR Wing Pro by b14ckyy

Last crawled date: 3 years, 5 months ago

To keep the Aerodynamic of my AR Wing Pro as high as possible for long range flights and still be able to record high quality 4K video, I made this housing for the Runcam Split 4. It fits perfectly in the Nose compartment of the AR Pro.
The Camera module has a precise fit and ends up flush with the Lens Tube. Buttons of the Camera board are accessible at the front to start and stop recording as well as accessing the OSD. Air Vents at the front will blow fresh air directly over the board. If you want to fly in clouds or in moist air, use coating on the camera board. I recommend to also add a small heatsing to the main processor of the board, just to be safe.
Camera clamp and camera mainboard are held down with 5mm M2 screws. You can glue the housing in the fuselage but it should hold up well with the foam integrated clamps. To have a more secure fix I recommend to use the same 3M Dual Lock option as I recommend for my other Camera Mounts here: https://www.thingiverse.com/thing:4639763 The space for the Dual Lock pieces is integrated in the mount.