RunCam Hybrid FPV Camera mount by Neleus

Last crawled date: 3 years ago

This mount is designed for Runcam Hybrid FPV camera (and theoretically for Hybrid 2) to protect camera lens from sand and dirt using standard 37mm filter glass (like this https://www.amazon.com/Xit-XT37UV-37mm-Camera-Filters/dp/B00DQBB8OC). The glass is flat and super easy to clean.
The camera mound is also designed to fit a limited space inside the stock frame of Diatone 2019 GTR548 quad. I managed to align it with max 23 degree because of that limited space between top frame and bottom base. If you have another frame size you can adjust the angle easily in the parametric model attached.
HD DVR camera view is clear and not affected by the protection glass, however the FPV camera view is slightly covered by the glass edges, see photo. IMHO it's not critical because without the protector these two corners would be still covered by motors and frame so you'll never have absolutely no barriers at those places.
How to fix the glass:
1) insert the glass in the slot and push so it is deep on 1mm
2) then glue s4.stl part on top of the glass along the groove around the slot (i use regular ABS solvent)