Thingiverse
Ruger 10/22 Trimag Magazine caddy by chevyfried
by Thingiverse
Last crawled date: 3 years, 2 months ago
Edit 4/4/21: I added a new caddy that will thread an M4 screw right in, no need for a bolt on the other end. As long as you don't overtighten and strip the threads, it will stay secure.
This is a remix of Vik's design found at https://www.thingiverse.com/thing:4715407
Ruger 10/22 Trimag design.
He hade an excellent 3 mag adapter, but I do not like the idea of having to glue them to the adapter. I adapted the model so there is a lid on top that gets bolted on with an m4 hex screw and bolt.
Currently, inside the adapter is a recess to place 3 m4 bolts, but I am working on a design that will allow the bolts to thread themselves in, as the holes got a bit messy without supports. It still worked, but not ideal.
The lid needs to be printed 100% infill.
I printed the trimag at 4 walls, 50% infill, supports touching buildplate.
.2 layer height is fine. Used eSun PLA+
This is a remix of Vik's design found at https://www.thingiverse.com/thing:4715407
Ruger 10/22 Trimag design.
He hade an excellent 3 mag adapter, but I do not like the idea of having to glue them to the adapter. I adapted the model so there is a lid on top that gets bolted on with an m4 hex screw and bolt.
Currently, inside the adapter is a recess to place 3 m4 bolts, but I am working on a design that will allow the bolts to thread themselves in, as the holes got a bit messy without supports. It still worked, but not ideal.
The lid needs to be printed 100% infill.
I printed the trimag at 4 walls, 50% infill, supports touching buildplate.
.2 layer height is fine. Used eSun PLA+
Similar models
thingiverse
free
GSG16 10/22 adapter by Phazed_G1
...ht where the faux suppressor goes and reuses the set screws, the 3 set screws on the 10/22 adapter holds onto the 3d printed part
thingiverse
free
Ruger 10/22 Barrel Band - threaded by bluemike807
...eplacement. works fairly well, especially with my ruger 10/22 barrel band sling swivel: https://www.thingiverse.com/thing:2278810
thingiverse
free
Ruger 10/22 picatinny adapter by MercutiosDesign
...es
the holes are to small and you need adjust them a little bit. :)
after printing i used aceton to make the surface look nicer.
thingiverse
free
Ruger MK3 Magazine Extension +1
...printed with 50% infill gyroid recommended,
no supports
pla worked fine.
might need to be printed slower for the slight overhangs
thingiverse
free
Vault Door Style Cap / Lid by dkummer
...l.
print settings:
3 to 4 walls
4 top
4 bottom
20 % infill
0.20 mm
additional material:
16x m4 16mm screws
16x rutex m4 inserts.
thingiverse
free
Ruger 22/45 Bolt Puller by ngray1519
...s. however you should probably print it with supports "where touching build plate". let me know how it works for you.
thingiverse
free
Ruger SR22 thread adapter wrench by rznazn
... sr22 thread adapter wrench by rznazn
thingiverse
simple tool for tightening and loosening the thread adapter for my ruger sr 22
thingiverse
free
Ruger Bipod by nurkob72
...eat stiff legs and mount does not wobble.
additional parts:
6x 3/4 4-40 screws
6x hex nuts for screws
6x washers (not necessary)
thingiverse
free
10/22 Mag Holder
...10/22 mag holder
thingiverse
box with lid to hold 5 ruger 10/22 mags.
thingiverse
free
Ruger 10/22 Magazine Caddy by SloMose
...t;inch" format. you can change your slicer settings to "mm" or scale up to 25.4. sorry, will try harder next time.
Chevyfried
thingiverse
free
DIYmall 12 Bits 12 X WS2812B 5050 RGB Ring Mount by chevyfried
...will friction hold a diymall 12 led ws2812b ring.
https://www.amazon.com/gp/product/b0105vmuuq/ref=ppx_yo_dt_b_asin_title_o01_s00
thingiverse
free
SB Tactical SBA3 Storage Device-Remove Before Use Remix by chevyfried
...er, but i am pretty sure it saved my dogs' lives at least 7 of the 9 times the atf raided my house. rip buster and chuckles.
thingiverse
free
5g Mind Control Tower and DNA Recombiner by chevyfried
...
do you need your dna recombined?
well have i got the tool for you.
print your own 5g tower from the safety of your faraday cage.
thingiverse
free
Mag Release Extension for Marlin 795 w\ OEM Guard by chevyfried
...arlin 795 mag release here: https://www.thingiverse.com/thing:4649359
should fit 795s with oem trigger guards.
credit to ted3682
thingiverse
free
Ubiquiti Unifi USG Rack Mount with side support by chevyfried
... it with triangular supports that give it much needed strength on the side on the mounting plate.
left or right side rack prints.
thingiverse
free
Custom remote holder by chevyfried
...ustom remote holder by chevyfried
thingiverse
this remote holder will hold an lg, roku, xfinity x1 and samsung soundbar remotes.
thingiverse
free
Low-Poly Beldum Remix - 2 piece by chevyfried
...low-poly beldum remix - 2 piece by chevyfried
thingiverse
remix-split in two so you dont need supports for the legs
thingiverse
free
Meltan Nutto Pokemon with tail ??? 891 Ditto by chevyfried
... very hard work.
ditto: https://www.thingiverse.com/thing:1980472/files
bolt: https://www.thingiverse.com/thing:1980472/files
thingiverse
free
15-22 lid by chong69
...by chong69 thingiverse just added the m&p logo to chevyfried#39;s lid for my 15-22 fits the box that i...
Ruger
thingiverse
free
Ruger mkIII 22/45 Lite gas pedal by hulabaloo
...l
6) insert screw from left side and screw both sides in til firm.
0.15-0.2 layer height
100% infill
no supports
no raft
no brim.
thingiverse
free
Ruger 1022 mag to slatwall by Szwalkiewicz
...distance of 75mm spacing with m5x15mm
i am using the aluminum inserts in the wall so you may need different t-nuts
if you are not
thingiverse
free
Ruger Mark IV mags to slatwall by Szwalkiewicz
...distance of 75mm spacing with m5x15mm
i am using the aluminum inserts in the wall so you may need different t-nuts
if you are not
thingiverse
free
Ruger 10/22 10-22 Single Shot Adapter BX1 BX-1 by Concorde
... problem feeding those into my ruger rimfire target rifle even though they won't feed properly out of a normal bx-1 magazine.
thingiverse
free
Large Caliber Reloading Funnel by ProdigiousIdiot
...thingiverse the lee funnel didn't fit on some 375 ruger was reloading so i made this, will fit over...
thingiverse
free
Ruger Silent-SR Disassembly tool by antuan_3000
...ruger silent-sr disassembly tool by antuan_3000
thingiverse
i created this to replace the original tool that i wore out
thingiverse
free
Ruger 44/96 stock extension by mbrownn
...lose proximity to the factory plate.
looks like thingiverse cant render the extended stock part, but it is included in the files.
thingiverse
free
MARK IV 22/45 LITE by andredguerra
...exported one from sketchfab, repaired and resized. sketchfab original file:https://sketchfab.com/3d-models/rugermark-lv-free-model-00e73660eeae4bb49d5442b06f51d881 ...
thingiverse
free
Savage Trigger Guard by bbiersch
...bbiersch thingiverse my design of a savage custom .204 ruger trigger guard. overall length is 3.44", mounting hole diameter...
thingiverse
free
Monopod renewal for Rifle by Badkappe456
...rifle by badkappe456 thingiverse i needed this for my ruger rpr. on the back monopod to become a higher...
Caddy
thingiverse
free
PS4 Fat Hard Drive Mod - 3.5in Version by dLiuTronGuy
...tuck away any excess cable in the original drive caddy space. finally, connect the new hard drive, screw it...
thingiverse
free
Jeton de caddie by Freekiwi
...jeton de caddie by freekiwi
thingiverse
tout bête mais fait le boulot :)
thingiverse
free
Caddx Vista Digital FPV Case by rivado
...more into the case (inside clearance between top of caddy vista and case top is around 7 mm). but...
thingiverse
free
Spade Bit Caddy (Hex Shank) by truglodite
... it more durable (most slicers default to 2 line walls, which is generally too weak to handle 'construction tool abuse').
thingiverse
free
4x 5.25" to 5x 3.5" Mount for HDD Caddy Trays by Doublehelix88
...trays by doublehelix88
thingiverse
mounting brackets for a 5x 5.25" bay. made for https://www.thingiverse.com/thing:4106276
thingiverse
free
Hanging Shower Caddy by whayden001
...ools is a crimping loop crimper if you chose to go that route or a nut driver for the cable clip clamps if you choose that route.
thingiverse
free
Ethnos Board Game organizer by danielbeaver
...he card caddies are scaled versions of hitomikojiru's card caddies. i use little tupperware containers for the player pieces.
thingiverse
free
PS4 Fat Hard Drive Mod Kit by dLiuTronGuy
...hold your drive safely in place even though your caddy#39;s top has been chopped...
thingiverse
free
FlashForge Finder tool holder by Flamingpumpkin
...tool holder by flamingpumpkin thingiverse this is a tool caddy for the flashforge finder. i printed with the top...
thingiverse
free
LED Remote Caddy by SuperMakeSomething
...becoming a patron at the following links:
https://www.buymeacoffee.com/supermakesmthng
https://www.patreon.com/supermakesomething
Magazine
thingiverse
free
Magazine File by ctheroux
...ine-file/
this object was designed using solid edge community edition.
you can request the source files on the page listed above.
thingiverse
free
FHW: Salamander Drum magazine with Bolter shell by thefreeheathen
...maker millwright
https://www.thingiverse.com/thing:4101822
salamanders logohttps://www.thingiverse.com/thing:2798548
bolter shell
thingiverse
free
Portable Solar Dial by fjkraan
...based on a description in an old (1984) education magazine i build a virtual replica of a portable sun...
thingiverse
free
AEP-Speedploader-Adapter by Bummi
...aep-speedploader-adapter by bummi thingiverse speedloader-adapter für aep-magazine ...
thingiverse
free
Citadel Mould Line Remover Handle by Dogmantra
...thingiverse one item you get with the mortal realms magazine subscription is a citadel mould line remover tool. when...
thingiverse
free
AEP Mag-Holder by Bummi
...mag-holder by bummi thingiverse halter für/holder for cyma aep lowcap-magazine ...
thingiverse
free
Spring Spacer for Jet Katana Mags for Safire Springs by racerethan
...the spring was used/missing. the spring is from this listing:https://www.etsy.com/listing/771695545/nerf-magazinespring-for-safire-half?ref=cart use https://www.thingiverse.com/thing:2867277 and this...
thingiverse
free
MAGNETIC MAGAZINE HOLDER by Jsnewson
...magnetic magazine holder by jsnewson
thingiverse
add a 32 x 3mm disc magnet (amazon) and attach with ca glue.
thingiverse
free
Fn Fal Metric Magazine to slatwall by Szwalkiewicz
...distance of 75mm spacing with m5x15mm
i am using the aluminum inserts in the wall so you may need different t-nuts
if you are not
thingiverse
free
SAR12 to T15 Mag Adapter by Untangle
...t15 and tmc magfed adapterhttps://youtu.be/n5eos7-mq1c link to other t15 adaptershttps://www.thingiverse.com/untangle/collections/t15-magazineadapter link to me talking about the differences of the...
22
thingiverse
free
Thread and Bobbin Storage by glsmith7
...mm tall, and 36 mm in diameter. bobbin dimensions: 22 mm in diameter and 13 mm tall. should be...
thingiverse
free
Silencer 9.2 by Bendfv
...up with in sound suppression and mass. designed for .22 lr guns with a .5''-28 thread. sound suppression was...
thingiverse
free
TacTiki - alternative pawns by Szarkan
...here is the board: https://boardgamegeek.com/image/4539219/tactiki link to the manual: https://s3.amazonaws.com/geekdo-files.com/bgg232423?response-content-disposition=inline%3b%20filename%3d%22actiki_-_a5_rulebook.pdf%22&response-content-type=application%2fpdf&x-amz-content-sha256=unsigned-payload&x-amz-algorithm=aws4-hmac-sha256&x-amz-credential=akiajyfnct7fkce4o6ta%2f20201024%2fus-east-1%2fs3%2faws4_request&x-amz-date=20201024t180126z&x-amz-signedheaders=host&x-amz-expires=120&x-amz-signature=f2db955abdd246b3cfc8fab24568af7035c510af5dc010a54a6e8b61fbe4a547 remix link (can't link in edit mode):...
thingiverse
free
PS4 Fat Hard Drive Mod - 3.5in Version by dLiuTronGuy
...is an unaffiliated link to purchase the sata extension cable:https://www.amazon.ca/duttek-extension-20inch-22pin-silmline/dp/b06xkzrb29/ref=sr_1_2?dchild=1&keywords=sata+extension&qid=1603560842&sr=8-2 ...
thingiverse
free
Spaceship Corridors by NTaW
...and first room added. door v2 coming next. edit 2020/11/22 door v2 open and closed added as well as...
thingiverse
free
AI3M threaded spindle z-axis leading / Trapezspindelhalter by Schmelzerboy
...innendurchmesser: 8 mm aussendurchmesser: 22 mm breite: 7 mm https://www.kugellagershopberlin.de/product_info.php?products_id=822&oscsid=al5ev8nv0o86d6gcro5v6asf34 benötigt werden 3 m3 muttern und 3 m3*18 mm...
thingiverse
free
screwable wall coat hanger (small) by benzol
...knob designed by 'megahertz77' is just scaled down to 22 and i needed the fixing part to be fitted...
thingiverse
free
Ruger mkIII 22/45 Lite gas pedal by hulabaloo
...l
6) insert screw from left side and screw both sides in til firm.
0.15-0.2 layer height
100% infill
no supports
no raft
no brim.
thingiverse
free
Two Tress Bluer Makara Tutucu ( TTB Spool Holder) by bastech
...i hope you like it. bearing dimensions outside diameter: 22 mm inner diameter: 8 mm height: 7...
thingiverse
free
Refrigerator Egg Holder by EzeCuervo
...egg holder. size: 85 mm x 184 mm x 22 ...
10
thingiverse
free
VESA monitor mount French Cleat by Rockster160
...you test that the bracket holds up. i used 10 infill, but 6 layers to give it some extra...
thingiverse
free
Dragon Fly Wind Spinner by NikDFish
...dragon fly wind spinner by nikdfish thingiverse note: 1028/2020 replaced file "dfly tail.stl" with proper content. it previously...
thingiverse
free
Blink Mini Security Camera Outdoor Enclosure by krisstewart
...a hair dryer on the low setting for about 1020 seconds while moving it around. once slightly warm (it...
thingiverse
free
Supports extensibles - Expandables holders - Logitech Universal Folio by FRTophu
...10 inchs tablets (in my case, a lenovo tab m10). ...
thingiverse
free
Ender 3, CR-10 fan duct by small_tornado
...ender 3, cr-10 fan duct by small_tornado
thingiverse
optimized fan duct for stock ender 3.
thingiverse
free
Box Divider Modules for PX12 KONGER drawers kit by LuisCRSousa
...boxes that divide each unit to 2, 6 and 10 parts. it fits perfectly inside and is great to...
thingiverse
free
MAGIC THE GATHERING ADVENT CALENDAR by brimstone326
...be slid into to stabilize the overall build. edit: 1030/2020 - just finished the last pieces. i ran out...
thingiverse
free
Holster for mk23 SOCOM TM/STTI by igdrassil
...(lock axle); din912 screws (hexagonal socket, cylinder head) м3: 10 mm - 3 pcs; 12 мmmм - 4 pcs;...
thingiverse
free
Rainbow Phoenix by TedXaptes
...means that i cannot guarantee for any of these: 10 grams lighter 23% faster print times less filament, cheaper...
thingiverse
free
Ender 3/CR-10 Extruder Tension Adjuster by 5284973
...ble spring tension. this is a simple insert that fits between the screw and the spring and allows for the spring to be tightened.