Thingiverse
Rudy Pando / Roman's Balance V3 Lightsaber Basic Chassis by Rex83014
by Thingiverse
Last crawled date: 4 years, 5 months ago
Need a chassis for your Rudy Pando/Roman's Luke Skywalker V3 Lightsaber? You're in luck! This chassis is designed to take advantage of the hidden sound hole below the clamp by positioning the speaker in the middle and angled up.
The chassis will accept a lithium-ion 18650 battery, a 24 mm Saber Essentials Stealth speaker, a Nano Biscotte V3/V4 or a Prizm 5.1 sound board, and a Switchcraft 2.1 mm recharge port. Make sure to use a double sided adhesive to secure the sound board to the chassis. I'd recommend using 30 gauge wire when wiring it.
For best results, print it vertically.
8/27/18 - UPDATE: Prizm 5.1 version added.
9/21/18 - Strengthened walls around where the chassis retention set screw hits on both versions.
The chassis will accept a lithium-ion 18650 battery, a 24 mm Saber Essentials Stealth speaker, a Nano Biscotte V3/V4 or a Prizm 5.1 sound board, and a Switchcraft 2.1 mm recharge port. Make sure to use a double sided adhesive to secure the sound board to the chassis. I'd recommend using 30 gauge wire when wiring it.
For best results, print it vertically.
8/27/18 - UPDATE: Prizm 5.1 version added.
9/21/18 - Strengthened walls around where the chassis retention set screw hits on both versions.