RS Gimbal for Mobuis HD camera for Nex Neo quad - UPDATED Feb 2014 by ronsand

Last crawled date: 4 years ago

Brushless gimbal for Mobius HD camera.
Feb 2014 UPDATED files after final fitting to Neo Quad. Files for both original brushless gimbal motors, and the slightly smaller 2206 motor. In both cases the roll motor has been flipped around to get the motor-wiring on the inside, non rotating, part of the frame. The frame mounts are both with and without added support for printing.
The specific parts for the 2206 motors are marked with "HK2206" in the file names. The Vtx and camera mounts are the same for both versions.
Updated Files for optional parts to fit a 25mm or 33mm fpv camera (left or right), and the Vtx directly to the gimbal base (to increase the mass for improved dampening).
Designed around 2206/2208 gimbal motors. Fully adjustable for tuning CG. Designed for the Nex Neo quad, but can be adapted for many other uses (a fixed wing version is also in the works). It is a straight fit for the Neo and replaces the original camera bracket (the holes should be opened up to 4 or 4,5mm for easier inserting the rubber dampers). It has built in rubber dampers for jello free video. Total weight without camera is only about 100-115 grams (motors and plastic parts). This weight is without the vtx and fpv camera mount (these weigh about 10-15 grams).
Here are the motors used:
HK2206: http://hobbyking.com/hobbyking/store/__43037__2206_140Kv_Brushless_Gimbal_Motor_Ideal_for_GoPro_style_Cameras_.html
2208: http://www.ebay.com/itm/Brushless-Gimbal-Motor-2208-KV80-for-Gopro-3-ge-/281221303619?pt=LH_DefaultDomain_0&hash=item417a188d43
These are the rubber dampers:http://www.ebay.com/itm/Flexible-Screw-Pin-Rivet-60pcs-X-Rubber-Mount-For-Anti-Vibration-Fans-PC-Case-/181218754794?ssPageName=ADME:L:OC:US:1120