RPI Cam + Arducam CSI-HDMI by nperto

Last crawled date: 3 years, 4 months ago

This is a case for the Arducam CSI-to-HDMI upgrade module, mounted with the RPI Cam V2.

2 types of casings and shades: T1 and T2.
T1 has a fixed shade, at the position where the case mount points to the right. If you want another fixed direction, please leave a comment and I will provide it for you here.
T2 has a multi angle shade. You can turn it in any direction you want.
The lid fits both types.


Both types of shades can be pulled of easily with cautiousness, if the camera comes out of focus, and you need to make it focus again.


You'll need 2 M2x8 screws. But both a 6 or a 10 mm. can do the job. The best is if you have some type of butt-head screws or other types of low-head screws.


Be aware of the short CSI cables when you mount the RPI + Arducam assembly to the case. It's a really tight fit!

All parts are designed for none support printing.
Happy 3D-printing.