Thingiverse
Router edge guide for DeWalt DNP612 by alanviverette
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is an edge guide that attaches to the DeWalt DNP612 plunge router base. It is modeled after the Bosch RA1054 -- minus the micro-adjustment (coming soon to this model!) -- which in my opinion is a huge upgrade over DeWalt's own edge guide. This may also fit other DeWalt router bases.
For the basic edge guide, print two sets of Edge guide bracket and one Edge guide base.
You will also need:
2x 18" 5/8" solid steel rods
8x 1" 1/4-20 hex bolts
4x 1/4-20 wingnuts
4x 1/4-20 hex nuts
This model includes an optional adjustable fence, which are the Edge guide fence files.
If you are also printing the fence, you will need:
4x 3/4" 1/4-20 hex bolts
4x 1/4-20 hex nuts
For the basic edge guide, print two sets of Edge guide bracket and one Edge guide base.
You will also need:
2x 18" 5/8" solid steel rods
8x 1" 1/4-20 hex bolts
4x 1/4-20 wingnuts
4x 1/4-20 hex nuts
This model includes an optional adjustable fence, which are the Edge guide fence files.
If you are also printing the fence, you will need:
4x 3/4" 1/4-20 hex bolts
4x 1/4-20 hex nuts