Round Flexure Switch by makersmakingchange

Last crawled date: 3 years, 5 months ago

This is a cost-effective, 3D printable accessibility switch. The switch has a 60 mm (2.5 inch) round activation surface and uses a standard 3.5 mm cable. The switch is 40 mm in height. Using the specified switch, the activation force is about 3.4 N (325-350 gf). The cost in parts is approximately $10 in hardware and 3D printing materials.
The switch is activated by applying pressure on the top surface. This switch can be connected to any standard AT interface, and can also be used with the Xbox Adaptive Controller. The switch can be used on a flat surface or mounted using the 1/4″-20 UNC connection on the bottom.
The top button / activation surface is attached to the base by threading it on. This makes it easy to change tops to change color, labels, etc.
More details and assembly instructions are available at the MMC Assistive Device page: https://www.makersmakingchange.com/project/round-flexure-switch-60mm/



Volunteer your 3D printing skills to help people with disabilities in your community!Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that helps people with disabilities.We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.