Thingiverse
Rotating Spool drawer made from Sunlu empty spools by Silmarillion90
by Thingiverse
Last crawled date: 3 years, 12 months ago
Designed storage system made from Sunlu empty spools. This drawer have a addition of bearing balls which makes it rotatable
For full assembly you will need
bearing balls (i've used 6mm bearing loose balls)
threaded rod
2x M5 nut and bolt (locknuts recommended)
8x M4 nut (locknuts recommended)
small magnets
metal flat elements (I used wood screws) so that the magnets had something to hold on to
Drawers downloaded and edited from
MistrYpsilon
https://www.thingiverse.com/thing:4604952
I'd like to thank for a great job
Drawers slightly scaled cuz original was a wee touch too big.
the inner_tube enters the inside of the spool, you can easily change the Z value, remember to subtract 5-7 millimeters so that there is room for the lid
For full assembly you will need
bearing balls (i've used 6mm bearing loose balls)
threaded rod
2x M5 nut and bolt (locknuts recommended)
8x M4 nut (locknuts recommended)
small magnets
metal flat elements (I used wood screws) so that the magnets had something to hold on to
Drawers downloaded and edited from
MistrYpsilon
https://www.thingiverse.com/thing:4604952
I'd like to thank for a great job
Drawers slightly scaled cuz original was a wee touch too big.
the inner_tube enters the inside of the spool, you can easily change the Z value, remember to subtract 5-7 millimeters so that there is room for the lid