Thingiverse
Rostock Nano BedClip. by nakarobo
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is the bedclip of Rostock Nano.
Rostock Nano is a small delta printer.
Rostock Nano : https://www.thingiverse.com/thing:2764097
This bed clip is simple in design, it can be made easily, but you can firmly fix the bed and beam.
Usage is simple. If you hook on a beam and slide it is fixed.
The thickness of the glass plate is modeled at 5 mm, but please printed adjust the Y axis scale according to your own environment.
Previously I used metal clips, but the glass plate sometimes moved.
Rostock Nano is a small delta printer.
Rostock Nano : https://www.thingiverse.com/thing:2764097
This bed clip is simple in design, it can be made easily, but you can firmly fix the bed and beam.
Usage is simple. If you hook on a beam and slide it is fixed.
The thickness of the glass plate is modeled at 5 mm, but please printed adjust the Y axis scale according to your own environment.
Previously I used metal clips, but the glass plate sometimes moved.
Similar models
thingiverse
free
Rostock Nano Light Clip
.... i snapped it on the bottom below travel to light the platform with 3 strips.
print on edge!
see the rostock nano here!
thanks!
thingiverse
free
Quick release bed clip for kossel delta by uhruh
... x 5mm)
m3 bolt and nut
sorry.
the first uploaded clamp geometry was updated incorrectly.
corrected due to missing rotation axis.
thingiverse
free
Trick Laser FSR Plate - Bed Clip for Rostock Max by RichWP
...
you will need to print 3, and buy the hardware to hold the clips in place - i used machine screws, wing-nuts and rubber washers.
thingiverse
free
Clip for Rostock MAX Onyx by stock
...clip for rostock max to connect onyx with aluminum plate and glass panel
still wip and testing
306mm onyx
263mm x 3,2mm glass
thingiverse
free
Rostock Nano Basic Cooler by nakarobo
..., so it's easy to remix.
i will change to this model in the future.
fixed fan :m3x20mm x2
fixed plathome m3×10mm ×1 with nut
thingiverse
free
glass bed clip by nikki81
...se
simple glass bed clip that lets you use the full size of the bed. the clip is for 214x214 heated bed with 200x200 glass sheet
thingiverse
free
Bed Warming clip to fix 3mm glass by shoke2k
...bed warming clip to fix 3mm glass by shoke2k
thingiverse
bed warming clip to fix 3mm glass
thingiverse
free
Bed clips by JohnnyTheOne
...eing slightly smaller than the heating build plate.
these clips allow you to mount and secure a glass plate to fit in the center.
thingiverse
free
GoPro/Rostock Clip by djdelorie
...e
thingiverse
a simple clip to hold a gopro (or in my case, gopro-shaped clone) aimed at the print bed of a rostock max printer.
thingiverse
free
Ender 3 glass bed clip by Mahtuerso
...ender 3 glass bed clip by mahtuerso
thingiverse
clips for fixing easily the glass bed
Bedclip
archive3d
free
Bed 3D Model
...bed 3d model archive3d bedclip 3d model for interior 3d...
thingiverse
free
MakerGear M2E-F bedclips by bkauf
...p://creativecommons.org/licenses/by/3.0/
link function is broken.
bed clips are 2.0 mm and 3.0 mm extensions. done in fusion 360.
thingiverse
free
Ender 3 Polypropylene Bedclips
...100% infill,
0.2mm layer height
suggest to print it in petg for a heated bed.
print as many as you want; i got 8 (2 on each side)
thingiverse
free
CR10 S5 Keenovo BedClips by NiclasB
...the front left clip clear of the wipe-zone or adjust the machine settings so it wipes deeper into the bed or closer to the center
thingiverse
free
Bedclip simple kossel by nitramDelta
...int
my bed is 4 mm thick, resize to your liking
i also made 6,5 mm and 8 mm
there are some more designs on https://bit.ly/2gcze14
thingiverse
free
MP Select Mini Glass Bedclips by ntdesign
...om/thing:1835673
edit: removed a bug in the .scad file pointed out by pete. please use the fixed file if you want to play around.
thingiverse
free
BedClips for Ender-2 by ninne
...e.com/documents/65c2da0fe28cf8e4088e17bb/w/7ae22e06331972d666634fc0/e/0919cc213dd749363ddf0c5b
added 2 more modules, 20 and 25mm.
thingiverse
free
Vertexheatbedfordummies-bedclips-left-right by svdv
... heatbed for dummies instruction.
see the vertex forum post: http://forum.velleman.eu/viewtopic.php?f=64&t=14714&start=90
thingiverse
free
Printrbot cable chain bedclip heatbed v2 by Teljemo
...youre done :)http://www.thingiverse.com/thing:1060522
works perfect :) lets just hope it can handle the heat in the longer run :)
Nakarobo
thingiverse
free
Desktop Quadruped Robot 「youtuasi」 by nakarobo
...tuasihttps://mechatro-life.com/nakarobo/8abfa792-5b8c-409c-8ed9-e22db39ed678
blog: (sorry japanese only.)https://www.nakarobo.com
thingiverse
free
Nano4Runner by nakarobo
...ted robot for 4 legs like an animals.
printing so easy, making so easy, playing so fun and funny.
blog:https://www.nakarobo.com/
thingiverse
free
Rostock Nano Basic Cooler by nakarobo
..., so it's easy to remix.
i will change to this model in the future.
fixed fan :m3x20mm x2
fixed plathome m3×10mm ×1 with nut
thingiverse
free
Rostock Nano(delta 3D printer) by nakarobo
...ht 15cm(max dir 13cm and 16cm) for 395mm smooth rods.
qualty 0.2mm(0.1mm to 0.3mm for 0.4mm nozzle)
speed 50mm/sec(100mm/sec max)
thingiverse
free
idbox! XYZ_LIMIT_SW_COVER by nakarobo
...イッチは光学式なので、太陽光のような周辺光の影響を受けます。
このカバーは迷光による誤動作を防いでくれます。
x,z軸用の部品(切り欠きのある方)はスイッチの取り付け位置が2mmになっており、y軸の部品は3mmになっているので、カラーやワッシャーは不要です。
thingiverse
free
Rostock Nano Building Manual by nakarobo
...test file:
cube_20mm.stl
shape_cylinder_120.stl
test print model: cushwa's owl statue.https://www.thingiverse.com/thing:18218
thingiverse
free
idbox! Z_Adjust_Set by nakarobo
...op plate and m3 nylon nut table adjuster.
caution:if your 3d printer is normal idbox then you're rescale 1.0038 x and y axis.
thingiverse
free
Rostock Nano CAD File by nakarobo
...)thingivers not recognaize 3df format files as cad files. so, i added a nakarobo.stl file for dummy that is not rostocknano part.
thingiverse
free
Rostock Nano 12mm Capacitive Sensor Mount by morganlowe
...change!! making this for the awesome rostock nano by nakarobo https://www.thingiverse.com/thing:2764097 see my other mods: 3 piece base: https://www.thingiverse.com/thing:2887196...
Rostock
thingiverse
free
Oarlock Liner by thwfwa
...inches. i printed it with pla on a seemecnc rostock 3.2 at 40 mm/s. i used cura 4.4 to...
thingiverse
free
E3D Mount / Piezo Sensor for Rostock MAX by bth
...clamp can now be fixed by using m3 screws without nuts)
get more flexibility to change dimensions by percentage in slicer ;-))
thingiverse
free
Mosquito for SeeMeCNC Artemis by emoser
...seemecnc se300 effector used on the artemis and some rostock printeres. you will need...
thingiverse
free
City houses in H0 / HO by NordicTram
...nordictram thingiverse city houses in h0 / ho scale (rostock - germany). see video below -...
thingiverse
free
SE300 Hotend Fan Shroud by Narrow_Path_3D
...i created for the se300 hotend on my seemecnc rostock max version 3.2. it helps achieve better overhangs on...
thingiverse
free
Rostock Delta Printer Nema Mount by frknbsg
...nter is shifted because to get the best torque.
use minimum 3 perimeter and %20 infil. top holes re designed for m3 brass inserts
thingiverse
free
E3D Rostock Mount non-bowden by LawrenceN
...thingiverse a long time ago. i apologize for not extending the attribution. the original scad file is attached for adjustments.
thingiverse
free
Interstellar Communications Array by GarageBay9
...for the dish fits on the bed of my rostock max not modeled for any particular scale message ends...
thingiverse
free
Giants - Independent Dual Extruder (IDEX) by olo2000pm
...3pcs https://ooznest.co.uk/product/100k-epcos-thermistor/ dysza 2pcs https://e3d-online.com/nozzles-v6-brass rurka ptfe 2 metry https://pl.aliexpress.com/item/1m-ptfe-tube-teflon-pipe-to-tl-feeder-j-head-hotend-reprap-rostockbowden-extruder-1/32811240720.html?spm=a2g0s.9042311.0.0.27425c0f6ywpsy wiatraki 4pcs https://pl.aliexpress.com/item/gdstime-2-sztuk-dc-24-v-3d-drukarki-dmuchawy-wentylatora-ch-odnicy-30mm-x-10mm-3010/32864807067.html?spm=a2g0s.9042311.0.0.27425c0f6ywpsy ekstruder 2pcs https://pl.aliexpress.com/item/3d-cz-ci-drukarki-mk8-wyt-aczarki-stopu-aluminium-blok-bowden-wyt-aczarki-1-75mm-w/32895990333.html?spm=a2g0s.13010208.99999999.293.247d3c00ajbum7 krańcówka optyczna 4pcs...
thingiverse
free
TPU Belt Based on The Factorio Belt by wepollock
...concerned. i printed at 40mm a second using a rostock max v2 using a direct drive bondtech extruder and...
Nano
3d_ocean
$15
Robot
...3d arm assembly factory-robot hydraulic-machine industrial-robot max mechanical model nano sci-fi worker-robot robot originally created with 3ds max 2011...
3ddd
$1
KUTAHYA SERAMIK BREZZA
...granite ceramic kutahya seramik brezza brezza anthracit rectified polish nano 31x61 brezza caramel rectified polish nano, 61x122 brezza gold...
3ddd
$1
KUTAHYA SERAMIK VERSO VISCONTE
...granite ceramic kutahya seramik verso visconte verso rectified glossy nano 61x162 visconte rectified glossy nano, 61x162 usage area verso...
3ddd
$1
KUTAHYA SERAMIK ALKAZAR
...decor rectified, 30x75 floor tile alkazar carbon rectified glossy nano 61x61 alkazar white rectified glossy nano, 61x61 usage area...
3ddd
$1
KUTAHYA SERAMIK ONELYA, SILVA
...ceramic kutahya seramik onelya, silva onelya white rectified polished nano 61x61 onelya white rectified polished nano, 61x122 onelya white...
3ddd
$1
KUTAHYA SERAMIK ROVERE
...kutahya seramik pino, rovere rovere brown decor rectified polished nano 20x122 rovere brown rectified polished nano, 20x122 rovere grey...
3ddd
$1
KUTAHYA SERAMIK OPAL, NAVONA
...ceramic kutahya seramik opal, navona opal bone rectified polished nano 61x122 opal bone rectified polished nano, 81x81 opal bone...
3ddd
$1
KUTAHYA SERAMIK ONICE
...granite ceramic kutahya seramik onice onice gris rectified glossy nano 61x61 onice marfil rectified glossy nano, 61x61 onice gris...
3ddd
$1
KUTAHYA SERAMIK CALACATTA
...decor rectified, 30x75 calacatta rectified, 30x75 calacatta rectified polished nano 81x81 calacatta rectified polished nano, 61x61 _____________________________________ размер пола...
3ddd
$1
KUTAHYA SERAMIK SERPEGIANTE
...granite ceramic kutahya seramik serpegiante serpegiante bone rectified glossy nano 61x122 serpegiante bone rectified glossy nano, 61x162 serpegiante mink...