Thingiverse
Root 3 CNC X Gantry Panels (Z Panels) by Menneset
by Thingiverse
Last crawled date: 3 years, 4 months ago
A set of printable X carriage (Z) panels for the Root3CNC by sailorpete.
For more details on the Root CNC project, look here.
Updated 8/1/17 - Upper_Front.stl and Z_Carriage.123dx, see Comments.
Final Assessment: After using the machine with the printed panels for a couple of weeks, I have concluded that they are just not stiff enough to do the job. I had to dial down both the speed and depth of cut. They work, and will get your machine running reliably, but it can easily be better. So, my suggestion is to use these to get your machine running long enough to cut some wooden panels, then replace them. - Thanks.
This model is based on the dual wood brace version of the X carriage with the universal panel option. I removed some unnecessary holes and clipped a bit off of the top of the panel to create my version of the front panel. You can if you prefer, print two back panel sets to get the original universal panel set.
I split both the front and back panels into two parts. The bottom half for both panels is identical, you will need to print one Z_Upper_Front, one Z_Upper_Back, and two Z_Lower. Or, print two Z_Upper_Back and omit the Z_Upper_Front. You will likely not need to print the Z_Bonding_Plate
To assemble you will need four smooth 3mm rods 60mm to 80mm long. The rods should fit snugly in the two holes found on the mating edge of each panel piece. Taping the rods into place with a small hammer may help. If you have to do more than just tap them, then they are too tight--forcing them will crack the plastic. It may be necessary to clear out the holes with a 3mm (or 1/8 inch) drill bit. I salvaged my 3mm rods from old CDROM and DVD drives.
As you assemble the remainder on the CNC build, components will be bolted into place which will serve to hold the two halves of the panel securely together. At this time I have not assembled the front panel (I am still waiting on parts to arrive.) The intention is that the linear rails will secure the two halves of the panel. I have also provided a Z_Bonding_Plate model that may be used to strengthen the front panel. Again, I don't think that will be necessary.
One final note regarding the bonding plate only... when I model a screw hole with a nut trap that will be printed in an inverted position such as this piece has, I include a very thin layer across the screw hole at the top of the nut trap. This causes the slicer to treat the top of the nut trap as a bridge rather than an overhang.
For more details on the Root CNC project, look here.
Updated 8/1/17 - Upper_Front.stl and Z_Carriage.123dx, see Comments.
Final Assessment: After using the machine with the printed panels for a couple of weeks, I have concluded that they are just not stiff enough to do the job. I had to dial down both the speed and depth of cut. They work, and will get your machine running reliably, but it can easily be better. So, my suggestion is to use these to get your machine running long enough to cut some wooden panels, then replace them. - Thanks.
This model is based on the dual wood brace version of the X carriage with the universal panel option. I removed some unnecessary holes and clipped a bit off of the top of the panel to create my version of the front panel. You can if you prefer, print two back panel sets to get the original universal panel set.
I split both the front and back panels into two parts. The bottom half for both panels is identical, you will need to print one Z_Upper_Front, one Z_Upper_Back, and two Z_Lower. Or, print two Z_Upper_Back and omit the Z_Upper_Front. You will likely not need to print the Z_Bonding_Plate
To assemble you will need four smooth 3mm rods 60mm to 80mm long. The rods should fit snugly in the two holes found on the mating edge of each panel piece. Taping the rods into place with a small hammer may help. If you have to do more than just tap them, then they are too tight--forcing them will crack the plastic. It may be necessary to clear out the holes with a 3mm (or 1/8 inch) drill bit. I salvaged my 3mm rods from old CDROM and DVD drives.
As you assemble the remainder on the CNC build, components will be bolted into place which will serve to hold the two halves of the panel securely together. At this time I have not assembled the front panel (I am still waiting on parts to arrive.) The intention is that the linear rails will secure the two halves of the panel. I have also provided a Z_Bonding_Plate model that may be used to strengthen the front panel. Again, I don't think that will be necessary.
One final note regarding the bonding plate only... when I model a screw hole with a nut trap that will be printed in an inverted position such as this piece has, I include a very thin layer across the screw hole at the top of the nut trap. This causes the slicer to treat the top of the nut trap as a bridge rather than an overhang.
Similar models
thingiverse
free
Easier to Print Simonious' Supa-Flat X-Carriage by Ember
...w your slicer to generate any kind of bridging to print the hole on top of the larger nut trap, resulting in additional clean-up.
thingiverse
free
DVD laser carriage plotter parts by NilsR
...progress will be shared here. if you're building a similar project, you can use these parts as a base,...
thingiverse
free
Nut trap size test by Torby
...n, i'd give them credit.
oh. it came from github uploaded by stemer114 https://gist.github.com/stemer114/324c382a528d10b43759
thingiverse
free
Dremel CNC - Long Bed Printer Carriage by ConnorM2009
...co poly or abs may be better. it is still work in progress as need to work on limit switch bracketry and a bracket for a bl touch
thingiverse
free
MPCNC Corner Span Supports by Droneme
... .25in. dowel for alignment. after the threads are started you can pull the dowel out.
update-added a nut trap for 25mm conduit.
thingiverse
free
Topeak Quicktrack adapter for Stromer ST1X Racktime rack by pmeyer
...nd a nut below. the brace keeps the adapter from sliding off.
the quicktrack bag should then slide on and clip to the front bar.
thingiverse
free
Eclips3D modified A9,A10,A11,A12 Y axis rod holders by Av8er
... change to the rear holders is that i enlarged the rod hole to mach the front. if you use them you may not need to use any shims.
thingiverse
free
Bushing holder for 20mm hole-separation by misan
...the holder and the holder has nut-traps for m3 that with 12mm m3 screws will allow the part to be securely fixed to the carriage.
thingiverse
free
Rear Axle For 3mm threaded rod by jsloat31
...ors. i secured the wheels with the 3mm nuts that are used for the build. i did use the printed wheel lock nuts for added support.
thingiverse
free
ANET A8 Power Switch Box by MrWoo
...ay also want to resize the motor plate (the part that slides under the motor for stability) to fit your own personal installation
Menneset
thingiverse
free
Light Ring for 65mm CNC Spindle by Menneset
...er you normally do should be just fine. i used e3000 to glue the led ring to the clamp, but again, use whatever you have on hand.
thingiverse
free
Dremel Slicer by Menneset
...emember where it came from. if you find it useful then buy me a beer. if you use it to make money, then buy me a six-pack. enjoy!
thingiverse
free
Clamp Set for T-Slot Worktables (M5) by Menneset
...age the nut which was already in place. it also helps to use a tap on the trapped nut to clean the threads of any excess plastic.
thingiverse
free
Dial Indicator CNC Spindle Mount 52mm by Menneset
... the thumb screw shown is not included. it was one i had in my screw jar, but there are plenty of knob generators on thingiverse.
thingiverse
free
VIC-20 Pi Conversion Panels by Menneset
...re restore key during the pro micro boot or reset will disable the keyboard interface and allow access to the arduino bootloader.
thingiverse
free
Turntable Filament Shelf for Flashforge Dreamer by Sami_Rahman
...dreamer. the dreamer uses undersize filament spools. i printed menneset#39;s filament turntable, https://www.thingiverse.com/thing:1307952, loved it but did not want...
thingiverse
free
Root 3 CNC E-Stop Button Housing by Menneset
...n with the lettering offset a bit from the face in the hopes that this will help if anyone has difficulty printing the first one.
thingiverse
free
Root 3 CNC NEMA 23 Spacer with Tab by Menneset
...oot 3 cnc that has an extra tab for adding a threaded rod cross piece to serve as a stiffener for the entire x carriage assembly.
thingiverse
free
Mega/Ramps Fan Mount by Menneset
...it has mounting holes for both 60mm fans and for 40mm fans. typically you will print two, but one alone could work in some cases.
Gantry
cg_studio
$59
Container Crane3d model
...crane3d model cgstudio container crane port dock ship terminal gantry construction shipping lift low poly cargo freight berth harbor...
cg_studio
$64
Rubber Tire Gantry Crane3d model
...d model
cgstudio
.3ds .max - rubber tire gantry crane 3d model, royalty free license available, instant download after purchase.
3d_export
$200
Port Containers 3D Model
...containers sets collection set port harbor terminal container shipping gantry crane ship vessel ocean yard truck trailer port containers...
3d_export
$30
Crane 3D Model
...model 3dexport crane bridge travelling weight heavy equipment building gantry lift crane 3d model whew 65886...
3d_export
$50
RMG Gantry Crane 3D Model
...t hoist rail rubber tyre tire rtg eot beam portal heigh tonne shipyard port
rmg gantry crane 3d model 5starsmodels 42860 3dexport
3d_export
$180
Houston Nasa Space Center Shuttle 3D Model
...launchpad shuttle centre launch pad texas thruster aircraft spacecraft gantry houston nasa space center shuttle 3d model video fx...
3d_export
$95
DPRK Musudanri Launch Facility 3D Model
...launch facility pad taepo dong missile rocket satellite military gantry bunker kwangmyongsong-2 truespace cob dprk musudanri launch facility 3d...
3d_export
$15
Dockside crane 3D Model
...dockside crane 3d model 3dexport bridge crane dockside frame gantry portal (jib) dockside crane 3d model mur 1267...
3d_export
$10
gantry crane 4
...;br>lod0- 23000 verts total<br>lod1 - 8000 verts total<br>lod2 - 4000 verts total<br>lod3 - 2000 verts total
3d_export
$15
gantry feeder with centerless mill
...ere is a special large silo to reduce the feeding times.<br>4. when feeding, reduce the work of bumping, reduce scrap rate.
Root
3d_export
$10
Old Stump 3D Model
...stump 3d model 3dexport stump tree old decorative stub root old stump 3d model denis2 96623...
3d_ocean
$9
Flowers on trunk Lowpoly
...3docean bright environment flower green leaf lowpoly nature plant root trunk flowers with leafs and lianes on trunk. lowpoly...
3d_ocean
$22
Fig Plant in Glass Vase
...c4d fig glass green interior max plant planter pot root vase water 3d model of fig plant in glass...
3d_export
$49
Structure of a Normal Heart Vein 3D Model
...human male female anatomy artery blood flow cells dna root internal organs vessels maya c4d structure of a normal...
3ddd
$1
CHAIR ROOT by Customform
...chair root by customform
3ddd
customform
chair root by customform.texture included.
3d_ocean
$5
Potatoes
...kitchen market mash peel potato potatoes red restaurant roast root shopping spud supper sweet potato vegetable 6 different low...
3d_ocean
$5
Fantasy Tree Light
...painted hots low poly mesh mobile optimized package pole root solid tiles tree light unirpg warcraft wood woodelf wow...
3d_ocean
$89
Skoda Roomster 2011
...strong foundation for its five-car portfolio. the supermini’s family root are evident throughout. from the bold, elegant lines of...
3d_ocean
$8
Woody Duplan
...hollow living trees low poly mob mouldering old school root spy stub stump tree trees wood yellow low-poly mob...
3d_ocean
$75
Underworld: Modular Caves
...modular caves 3docean cave cavern dungeon mine mushroom rock root shroom stone underground underworld extensive package for easy creation...
Cnc
3d_export
$30
Decorative panel 3D Model
...decorative panel 3d model 3dexport decorative panel stl cnc prototyping carved ornament decor decorative panel 3d model 3dbyte...
3d_export
$25
Sculpture crew cut 3D Model
...cut 3d model 3dexport crew cut sculpture stl 3d cnc sculpture crew cut 3d model dbyard 72861...
3d_export
$10
Horizontal decor 3D Model
...horizontal decor 3d model 3dexport horizontal decor stl cnc prototyping carved horizontal decor 3d model 3dbyte 78665...
3d_ocean
$7
3D Mirror
...3d mirror 3docean 3d accessories antiques cnc curtains decor decoration fabrics furnishing furniture gold interior leaf...
3d_export
$6
Fretwork grille 3D Model
...grille forging molding modeling fence gate patch pattern thread cnc window wall frame baroque classic fretwork grille 3d model...
3d_export
$6
3D Wall Panel 3D Model
...picture gold 3d modern laser cutting pattern contemporary wall cnc people 3d wall panel 3d model download .c4d .max...
3d_export
$6
3D Wall Panel 3D Model
...picture gold 3d modern laser cutting pattern contemporary wall cnc 3d wall panel 3d model download .c4d .max .obj...
3d_export
$6
3D Wall Panel 3D Model
...picture gold 3d modern laser cutting pattern contemporary wall cnc lips 3d wall panel 3d model download .c4d .max...
3d_export
$6
Cartouches SET 3D Model
...cartouche ornament pediment fronton classic corbel decor center collection cnc baroque rococo plaster carved gypsum onlay cartouches set 3d...
3d_export
$6
3D Wall Panel 3D Model
...picture gold 3d modern laser cutting pattern contemporary wall cnc 3d wall panel 3d model download .c4d .max .obj...
Z
3ddd
$1
ПОДВЕСНОЙ УНИТАЗ + БИДЕ cersanit
...[мм] 355 глубина [мм] 525 carina настенное биде артикул p-bi-carina-z ширина [мм] 355 глубина [мм] 525 link кнопка смыва,...
3ddd
$1
Игровой автомат Gaminator fv629
...gaminator fv629. polys: 14 864 x: 570mm y: 415mm z ...
3ddd
$1
Букет сирени
...букет , ваза polys: 331007 габаритные размеры: x-545mm, y-525mm, z595mm. ...
3d_ocean
$7
Glass Door Z 006
...cluded material pack — you may mix materials with no restrictions. there is some renders for example — you may download materi...
3d_ocean
$7
Glass Door Z 002
...cluded material pack — you may mix materials with no restrictions. there is some renders for example — you may download materi...
3d_ocean
$9
GLOWING AND RIGGED ALPHABET A TO Z
...ng like light and its rigged increate deformers > non linear like bend,twist, stretch and squash eight types of movemen...
3d_export
$19
Glass Door Z 007 3D Model
...gle hinge brass entry door
glass door z 007 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl quartor 104462 3dexport
3ddd
$1
Orchid bouquet 2.0
...of model: x = 450 mm y = 460mm z = 745 mm the archive contains all the textures....
3ddd
$1
"Louix" стул и табурет_"Louix" сhair High and stool
...в центре сцены в нулевых координатах. привязка по оси "zquot; для каждого элемента находится в нулевой высоте и в...
3ddd
$1
Outdoor Gym Set 1
..."z". gym vol.7538 polys - 19986 verts - 20580 siz - 630 x 1000 x 1545 gym vol.7537 polys...
Panels
3d_export
$30
Decorative panel 3D Model
...anel 3d model
3dexport
decorative panel stl cnc prototyping carved ornament decor
decorative panel 3d model 3dbyte 87694 3dexport
3d_export
$95
Starship Bridge Command Center 3D Model
...d center bridge panel control console future futuristic captain
starship bridge command center 3d model fattypants 32726 3dexport
3d_export
$20
Oven MAX 2011 3D Model
...as hob stove cooker kitchen oven interior worktop cooking panel top pan
oven max 2011 3d model motionmediaworkshop 69949 3dexport
3d_export
$99
Opel Vivaro Panel Van 2006 3D Model
...010 2011 2012 2013 2014 mpv van minivan bus commercial cargo germany
opel vivaro panel van 2006 3d model humster3d 85079 3dexport
3d_export
$29
StJames Framed Panel Bed 3D Model
...oration hardware bedding interior classic furniture quilt bedclothes pillow
stjames framed panel bed 3d model ntsa 69963 3dexport
3d_export
$19
Baseball Ball 3D Model
...ball 3d model 3dexport ball play sport baseball two panels pieces rubber cork leather collection photorealistic detailed materials 3d...
3ddd
$1
3d panel rhombus
...3d panel rhombus
3ddd
панель
wooden rhombus 3d panel
segment size 30x50mm
3ddd
$1
3D panel Wave wall
...3d panel wave wall
3ddd
панель
3dsmax 2012+obj+.fbx
3ddd
$1
panel
...panel
3ddd
панель
+fbx
3ddd
$1
wooden 3d panel 3
...wooden 3d panel 3
3ddd
панель
3d панель из светлого дерева
2 вида модулей
размер модуля 200х200
3
3d_export
$99
MercedesBenz Axor Tractor Truck 2011 3D Model
...012 2013 2014 2015 2016 truck heavy duty trucks industrial
mercedesbenz axor tractor truck 2011 3d model humster3d 93185 3dexport
3d_export
$99
Toyota Yaris 2012 5door 3D Model
...2012 5-door 5d 3d 3-door 2013 2014 2015 2016 hatchback japan small city car
toyota yaris 2012 5door 3d model squir 47702 3dexport
3d_export
$7
Pendant Lamp 3 3D Model
...pendant lamp 3 3d model
3dexport
pendant lights lighting bulb ceiling lamp
pendant lamp 3 3d model bessoo 87379 3dexport
3d_export
$99
Kia Pro Ceed 3door hatchback 2011 3D Model
...y hatchback hatch estate europe hyundai i30 south korea forte
kia pro ceed 3door hatchback 2011 3d model humster3d 50040 3dexport
3d_export
$30
3 bedroom maisonette plus swimming pool 3D Model
...s swimming pool 3d model
3dexport
house swimming building
3 bedroom maisonette plus swimming pool 3d model camarra 59238 3dexport
3d_export
$25
Keyboard Workstation 3 3D Model
...etailed music instrument sound studio keyboard workstation key chrome metal
keyboard workstation 3 3d model cgaxis 70062 3dexport
3d_export
$24
Photorealistic Low Poly Building 3 3D Model
...hitecture urban residential suburb europe city cityscape vray
photorealistic low poly building 3 3d model vkmodels 64244 3dexport
3d_export
$99
Kia Pro Ceed 2014 3D Model
...rt
kia pro ceed 2014 2015 2016 2013 3-door hatchback compact city south korea
kia pro ceed 2014 3d model humster3d 64388 3dexport
3d_export
$60
RKG 3 Grenade 3D Model
...mb gun weapon explosives army marine explosion hand handgrenade russia soviet iraq
rkg 3 grenade 3d model blacks3d 52716 3dexport
3ddd
$1
ferm_LIVING_baskets
...создаете себе красивый столик. в дополнение к столику идет декор.http://www.fermliving.com/webshop/shop/wire-baskets.aspx http://www.fermliving.com/webshop/shop/wire-baskets/wire-basket-top-3aspx http://www.fermliving.com/webshop/shop/all-products/winebottle-candleholder-5.aspx http://www.fermliving.com/webshop/shop/geometry-vase-1.aspx в архиве max...