Thingiverse
Rollenhalter
by Thingiverse
Last crawled date: 5 years, 9 months ago
This spool holder is designed for putting to 2040 aluminium rails.
The OpenSCAD file additionally contains the 2040 profile and a very rough model of the AM6 metal frame.
You can enable the display with umgebung=1 this is not for printing but for the design phase only.
The length of the spool axis can be configured with Achsenbreite (defaults to 62mm). The model can be printed with or without holes in the arm (loecher=1/0). Maybe it is stronger with the holes, depending on your infill.
Feel free to remix and send me the results :-)
The OpenSCAD file additionally contains the 2040 profile and a very rough model of the AM6 metal frame.
You can enable the display with umgebung=1 this is not for printing but for the design phase only.
The length of the spool axis can be configured with Achsenbreite (defaults to 62mm). The model can be printed with or without holes in the arm (loecher=1/0). Maybe it is stronger with the holes, depending on your infill.
Feel free to remix and send me the results :-)