Thingiverse
Robotis Turtlebot 3 Dual Camera Mount by kneave
by Thingiverse
Last crawled date: 4 years, 6 months ago
A dual camera mount for the Robotis Turtlebot3 Burger, though it'll fit any robot that uses waffleplates.
Print with the logo face down and no supports will be needed, M2 screws are used to attach the cameras. Please note, I used the Waveshare cameras that have flat rears so they sit flush against the bracket. If using standard Pi cameras you'll need a spacer per screw.
Print with the logo face down and no supports will be needed, M2 screws are used to attach the cameras. Please note, I used the Waveshare cameras that have flat rears so they sit flush against the bracket. If using standard Pi cameras you'll need a spacer per screw.