Robotech ORBOT changer (Valkyrie)

Last crawled date: 4 years, 2 months ago

This is a work in progress. Please read and watch my youtube video before printing.
https://youtu.be/MYdi06LypYg
This is modeled from the Revell kit. The parts are drawn in mm and to kit dimmensiosn. I am printing 3X bigger.
All of the parts are drawn (except for the open hands and pilot), and the sketchup files and stl files are all included. Some parts are mirror image and will be labeled in pares; ex 37 (36). Print 37, then mirror it and print for part 36. Parts 37,36 have a rev2 and you only need rev2. I was having issues with the STL for those parts, but they have been fixed (thanks alpokemon) and is now loaded into the files. The fixed one is not in the zip file. So do not print the part 37(36) from the zip file.
The instructions are now in a zip file as well.
I plan on vacuum forming the canopy, so I have inluded canopy files slightly over, under, and normal size incase you want to cast it, form it, or just print it.
I also plan on sanding and filling all parts smooth and painting. I will be adding youtube videos as I build.
I cannot gurantee all pats fit perfect. Expect to have to sand, file, or modifiy parts as needed. If you notice any major errors please let me know.
The bushings I'm printing in ABS, the tires ninjaflex, everything else is PLA. Some parts are drawn as two pieces (to aid in printing) to get glued together.
Thanks for looking, and good luck!