Thingiverse
Robo-Shutta for terraPin Pinhole Cameras by schlem
by Thingiverse
Last crawled date: 3 years, 1 month ago
Add remote control to the terraPin camera's shutter! Make pinhole photos operating distant to the camera, or program an Arduino or similar for shutter control.
These are alternative extensions for the terraPin 6X6 and 6X9 pinhole camerashttp://www.thingiverse.com/thing:495230http://www.thingiverse.com/thing:577223
The only modifications are to the shutter blade and the body of the extension, which accommodates a small hobby servo to actuate the shutter blade via remote or automated control.
I shot a few rolls out the back window of my Prius, controlling the Robo-Shutta from the driver's seat. Click the link for the Flickr Album.
I have included a sketch for remote control with an Adafruit Trinket Arduino (semi-) compatible. The Trinket cannot output PWM, but a clever hack uses interrupts to simulate the necessary servo signal timing. Here's a video of a Trinket Arduino compatible microcontroller opening and closing a terraPin shutter
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.
These are alternative extensions for the terraPin 6X6 and 6X9 pinhole camerashttp://www.thingiverse.com/thing:495230http://www.thingiverse.com/thing:577223
The only modifications are to the shutter blade and the body of the extension, which accommodates a small hobby servo to actuate the shutter blade via remote or automated control.
I shot a few rolls out the back window of my Prius, controlling the Robo-Shutta from the driver's seat. Click the link for the Flickr Album.
I have included a sketch for remote control with an Adafruit Trinket Arduino (semi-) compatible. The Trinket cannot output PWM, but a clever hack uses interrupts to simulate the necessary servo signal timing. Here's a video of a Trinket Arduino compatible microcontroller opening and closing a terraPin shutter
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.
Similar models
thingiverse
free
Butta Shutta for terraPin 6X9 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Butta Shutta for the P6*6 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin 6X6 "DX18" - 18mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin 6X6 "Incher" 25.4 mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Prime 6X6 Pinhole Camera -120 Film by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Stawp Gap by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin, a 120 Film Pinhole Photography System by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Bijou Sidewinder 6X4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Bijou 6 x 4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
Shutta
thingiverse
free
Butta Shutta for terraPin 6X9 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Butta Shutta for the P6*6 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Pour Arc Support Port by shivinteger
...butta shutta [+] rotating object = t69 40mm butta shutta002 [!] volume difference is 0.71% [+] scaled t69 40mm...
thingiverse
free
P6*6 120 Pinhole Camera by schlem
...100 and fuji velvia 50 transparency film:https://www.flickr.com/photos/theschlem/sets/72157645030373964/ new butta shutta for remote cable release look for addendum to user's...
thingiverse
free
Driven Helper "Pullpal" Camera by shivinteger
...- attribution - non-commercial [12] thing title : butta shutta for terrapin 6x9 pinhole camera [12] thing url :...
Terrapin
archive3d
free
Car 3D Model
...car 3d model archive3d car terrapin amphibian car swim n220711 - 3d model (*.gsm+*.3ds) for...
thingiverse
free
Terrapin X covers
...terrapin x covers
thingiverse
terrapin lens cover front and rear v.01
thingiverse
free
Terrapin Test object by scharkalvin
...m) to determine if your printer has the precision required to print the terrapin camera (http://www.thingiverse.com/thing:495230)
thingiverse
free
Aquarium terrapin terrarium by Josephskynet
...aquarium terrapin terrarium by josephskynet
thingiverse
a little thing i made for my friends turtles
thingiverse
free
terrapin gamera top cap with 10mm level hole by dwnickerson
...terrapin gamera top cap with 10mm level hole by dwnickerson
thingiverse
redesign of lid for terrapin kaiju gamera
thingiverse
free
Star Citizen Anvil Terrapin by Furysend
...y of weapons intended to keep the most fearsome vanduul raider at bay.
uses 8mm x 3mm and 8mm x 1mm magnets to connect the parts.
thingiverse
free
Terrapin ACME with blind tripod thread by Capelare
...hreaded tripod mount blind so light cannot enter through it.
check the original thing for instructions and the rest of the parts.
thingiverse
free
Hot shoe for example terraPin Kaiju 6x18 Pinhole Gamera by Volund
...glue on for instance terrapin kaiju 6x18 pinhole camera. for use with bubble spirit levelhttps://www.thingiverse.com/thing:876457
thingiverse
free
terraPin Stawp Gap by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Bijou 6 x 4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
Schlem
thingiverse
free
Tweezees by schlem
...tweezees by schlem
thingiverse
use 'em as chopsticks, use 'em as tongs. with springy action!
thingiverse
free
Simple Demitasse by schlem
...tasse by schlem
thingiverse
this thing was made with tinkercad.
you can order one here: http://www.shapeways.com/shops/bitforge
thingiverse
free
Flywatter Hanger by schlem
...tter by geir ( http://www.thingiverse.com/thing:9518 ), but wanted a way to hang it up. hole for dowel is 7mm, like thing # 9518
thingiverse
free
Dorba iPhone4 Case by schlem
...se
this thing was made with tinkercad.
for more information on the rare and elusive dorba bear, go here: schlem.deviantart.com/
thingiverse
free
ACME AMERICAN WROUGHT ANVIL by schlem
...acme american wrought anvil by schlem
thingiverse
“quality is our #1 dream”
anvils in warner bros cartoons
thingiverse
free
Sake / Shot Glass by schlem
...ith tinkercad.
an elegant shot glass to catch the crema. no cumbersome handles to get in the way of symmetry or clumsy fingers.
thingiverse
free
Dorba Head by schlem
...ar, go here: schlem.deviantart.com/ check out my shop on shapeways to get a 3d print of this object: shapeways.com/shops/bitforge
thingiverse
free
Space Pinhole Photographer by schlem
... conflict, the quiet photographer uses simple tools and photochemical processes to capture the beauty of the cold harsh universe.
thingiverse
free
Double-Shot Espresso by schlem
... was made with tinkercad.
extra-wide shot glass to catch both spouts of your portafilter. with a dainty handle. mmmmmm- coffee
thingiverse
free
Wiring Loom Clip by schlem
...hingiverse
designed in tinkercad, to fit 6mm ply, like printrbot. keeps your wiring firmly secured, designed for 15 mm looming.
Pinhole
turbosquid
free
Pinhole Glasses
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Pinhole Camera by StarScape
...pinhole camera by starscape
thingiverse
pinhole camera
thingiverse
free
Pinhole Camera by asoberon
...pinhole camera by asoberon
thingiverse
a pinhole camera.
thingiverse
free
Pinhole Glasses by amitkalia
...pinhole glasses by amitkalia
thingiverse
pinhole glasseshttps://en.wikipedia.org/wiki/pinhole_glasses
thingiverse
free
Pinhole Eclipse Viewer by ThunderClan
...pinhole eclipse viewer by thunderclan
thingiverse
this is a pinhole viewer for the sun.
thingiverse
free
Top pinhole cofee by Vanson
...erse.com/thing:1486588
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
thingiverse
free
Simple Pinhole Projector by kattanasio
...simple pinhole projector by kattanasio
thingiverse
very simple pinhole projector for the solar eclipse.
thingiverse
free
Viewfinder Pinhole sténopé by Vanson
...574
pinhole cofee mount for vanguard : http://www.thingiverse.com/thing:1486588
diameter box of coffee : 85 mm
31/0/2018 : add v2
thingiverse
free
Pinhole camera, Sténopé by Pradaldi
...pinhole camera, sténopé by pradaldi
thingiverse
simple design for a pinhole camera.
un sténopé tout simple.
thingiverse
free
pinhole cofee mount for vanguard by Vanson
...verse.com/thing:245574
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
Robo
3d_export
$5
robo
...robo
3dexport
just robo for your game or video
turbosquid
$15
robo
...obo
turbosquid
royalty free 3d model robo for download as max on turbosquid: 3d models for games, architecture, videos. (550622)
3d_ocean
$5
robo head
...docean
head machines robo robo head robot vray
robo head model max 2010 and obj model 1024×1024 texture vray 2.40 render material
turbosquid
$2000
robo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
robo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
robo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$11
ROBO
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Robo 3D Model
...robo 3d model
3dexport
he is robo
robo 3d model dpkisvv 32093 3dexport
turbosquid
$20
ROBO-BRAIN
...rbosquid
royalty free 3d model robo-brain for download as max on turbosquid: 3d models for games, architecture, videos. (550625)
turbosquid
$10
Robo-boy
...urbosquid
royalty free 3d model robo-boy for download as max on turbosquid: 3d models for games, architecture, videos. (1245875)
Cameras
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.