RNLI D Class Lifeboat Nav Console

Last crawled date: 5 years, 3 months ago

This is the console for a D class lifeboat made to fit in the 1/10 inflatable boat by new_POPE.
It turned out fine with 0.4 nozzle but to really have the details such as the man overboard button or more intricate buttons on the VHF show up it really should be smaller diameter.
remember to lay it on its back in your slicer to speed up the process and it also means you need no supports.
This also comes with the backplate that you can glue to the back for extra support or leave it out to house the ESC. Due to the real boat's cover being loose plasticised material and not solid, use a survival bivvi bag or thick orange carrier bag e.g. sainsbury's 10p strong bags and hot glue on to get correct look.
print at 100% scale if you're using new_POPE's boat.
[Check out the fuel can servo disguise i made so i can steer in this boat as i am too lazy to make the outboard he said to make!]
I have also made oars that fit on the same boat and look like the RNLI D Class ones. check em out! check out my pointed d class nose and pointed rear sponsons with extender!
the photo may look squished but i assure you its the right shape and dimensions