Thingiverse
![Ringing/Acceleration Test Part by vwfan0178](/previews/8025506.jpg)
Ringing/Acceleration Test Part by vwfan0178
by Thingiverse
Last crawled date: 3 years, 5 months ago
I made this part as a torture test to test different settings in Cura 4.7. The sharp corners, curves and long distance shows all of the effects of the different Cura/printer settings. The settings I used for this print is the best I have used so far for PETG.
To print the outer walls only, I used 0% infill and 0 top/bottom layers.
Given the amount of time I have spent calibrating my printer, I have attached my Cura settings for PETG as a reference point. Before changing over from single gear direct drive to dual gear direct drive, I used the same settings. I used a 4.5mm retract when I used a single gear bowden with capricon tubing.
To print the outer walls only, I used 0% infill and 0 top/bottom layers.
Given the amount of time I have spent calibrating my printer, I have attached my Cura settings for PETG as a reference point. Before changing over from single gear direct drive to dual gear direct drive, I used the same settings. I used a 4.5mm retract when I used a single gear bowden with capricon tubing.
Similar models
thingiverse
free
![Maker Gear direct drive extruder mount by gitrdun](/t/9050622.jpg)
Maker Gear direct drive extruder mount by gitrdun
...hingiverse
i broke my mg prusa direct drive extruder mount so i printed out a new one on my backup printer. all stock parts fit.
thingiverse
free
![Zonestar Hemera mount](/t/4833730.jpg)
Zonestar Hemera mount
... with an e3d hemera.
i printed the fan duct on my elegoo mars resin printer, but it could be printed with petg on an fdm machine.
thingiverse
free
![Airwolf Axiom Dual Direct drive compatible extruder gears by chasewall](/t/8292258.jpg)
Airwolf Axiom Dual Direct drive compatible extruder gears by chasewall
...ears in the photos are not the ones i put on my printer, i used a form 2 with durable resin to get solid gears with low friction.
grabcad
free
![FZJ80 Seat Worm Gear](/t/6078499.jpg)
FZJ80 Seat Worm Gear
...fferent shrinkage off the printer.
remove old plastic gear using arbor press or vice and deep socket, replace with printed gear.
thingiverse
free
![Cura profile for Overture PETG](/t/4683922.jpg)
Cura profile for Overture PETG
...with these settings on my sovol sv01.
the corner bracket shown was printed directly on the bed with no brim, skirt or mouse ears.
thingiverse
free
![EZOut mount for Creality Dual Gear Extruder by leandrebisson](/t/8029566.jpg)
EZOut mount for Creality Dual Gear Extruder by leandrebisson
...
this is a ezout mount for the creality dual gear extruder for a direct drive printer.
in my case i have a creality ender 3 pro.
grabcad
free
![Auger Throttle Parts](/t/5465793.jpg)
Auger Throttle Parts
...nds ice auger.
i used:
fusion 360 (awesome software)
cura (with support material and 100% infill)
monoprice mkii printer (petg)
thingiverse
free
![Husqvarna Automower AC220 LINIX motor gear by patLPG](/t/8370643.jpg)
Husqvarna Automower AC220 LINIX motor gear by patLPG
...used a 3mm drill and moved the gear on it to make it a bit looser. i also used a heat gun and knife to clean and adjust the gear.
thingiverse
free
![Compact bowden extruder for TinyBoy and Mini Fabrikator by Lion666](/t/8822133.jpg)
Compact bowden extruder for TinyBoy and Mini Fabrikator by Lion666
...t_e2_dir true // for direct drive extruder v9 set to true, for geared extruder set to false
and the extruder needs 158 steps/mm
cg_trader
$5
![Ford Focus 3 car window gear | 3D](/t/3926952.jpg)
Ford Focus 3 car window gear | 3D
...int speed is low, blowing of the printed model is disabled. use the settings recommended by the manufacturer of the petg plastic.
Vwfan0178
thingiverse
free
![Citrus Coaster by vwfan0178](/t/8361106.jpg)
Citrus Coaster by vwfan0178
...citrus coaster by vwfan0178
thingiverse
citrus coaster to protect your desk or coffee table!
thingiverse
free
![Calibration Cube with Bridge and String Test by vwfan0178](/t/8361245.jpg)
Calibration Cube with Bridge and String Test by vwfan0178
...calibration cube with bridge and string test by vwfan0178
thingiverse
test cube with string test and bride test
thingiverse
free
![Lemon Pencil Holder by vwfan0178](/t/8369487.jpg)
Lemon Pencil Holder by vwfan0178
... are two files. the "2" file is more vertical and the original is more outward. the original version is in the picture.
thingiverse
free
![Desk Cable Organizer by vwfan0178](/t/8367233.jpg)
Desk Cable Organizer by vwfan0178
...rew mounted to the bottom of your desk surface. they have a small pocket to keep the wire from falling out on freestanding desks.
thingiverse
free
![Snoopy Bird House by vwfan0178](/t/8033638.jpg)
Snoopy Bird House by vwfan0178
...-law who loves snoopy. it was designed to be mounted to a post. the parts fit tight enough where you do not need any glue. enjoy!
thingiverse
free
![Citrus Drawer Knob (IKEA KALLAX) by vwfan0178](/t/8361225.jpg)
Citrus Drawer Knob (IKEA KALLAX) by vwfan0178
...8
thingiverse
these are designed for the ikea kallax inserts which use m4 hardware but could be scaled for other hardware sizes.
thingiverse
free
![Elephant Google/Nest Home Mini Holder by vwfan0178](/t/8035566.jpg)
Elephant Google/Nest Home Mini Holder by vwfan0178
...t google/nest home mini holder by vwfan0178
thingiverse
this is an elephant version of my original google/nest home mini holder.
thingiverse
free
![COVID-19 2020 ornament by vwfan0178](/t/8120050.jpg)
COVID-19 2020 ornament by vwfan0178
...olidays. hopefully these will be a good conversation starter/distraction for a few minutes to avoid politics at the dinner table!
thingiverse
free
![Calibration Cube by vwfan0178](/t/8102904.jpg)
Calibration Cube by vwfan0178
...ot; print as i am not sure how uniform the bed temp.
if you were able to print faster or with a larger nozzle please let me know!
thingiverse
free
![Fan Mount Raspberry Pi 4 (1 x 40mm) by vwfan0178](/t/8244275.jpg)
Fan Mount Raspberry Pi 4 (1 x 40mm) by vwfan0178
...fan mount raspberry pi 4 (1 x 40mm) by vwfan0178
thingiverse
40mm fan standoff for raspberry pi 4
Acceleration
turbosquid
$45
![Accelerator Cannon](/t/13270132.jpg)
Accelerator Cannon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![OnCor Linear Accelerator](/t/13408962.jpg)
OnCor Linear Accelerator
...3d model oncor linear accelerator for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1609119)
3d_export
$80
![Isis neutron accelerator 3D Model](/t/138623.jpg)
Isis neutron accelerator 3D Model
...3dexport
isis neutron accelerator cutaway muons neutrons science project
isis neutron accelerator 3d model tartino 13745 3dexport
3d_export
$10
![Acceleration Couch 3D Model](/t/33097.jpg)
Acceleration Couch 3D Model
...ospace jet engine futuristic contemporary modern club lounge space couch sofa
acceleration couch 3d model jwwright 21907 3dexport
turbosquid
free
![Framework for Ardulogic (for car acceleration measurement))](/t/13337817.jpg)
Framework for Ardulogic (for car acceleration measurement))
...logic (for car acceleration measurement)) for download as stl on turbosquid: 3d models for games, architecture, videos. (1448303)
3d_export
$10
![Fermi](/t/11943286.jpg)
Fermi
...fermi
3dexport
a simple model of a particle accelerator
3d_export
$23
![Particle](/t/11945528.jpg)
Particle
...particle
3dexport
a rendering of a small part of a particle accelerator
3d_export
$10
![Time Warping In 3ds Max Complete Guide 3D Model](/t/12285.jpg)
Time Warping In 3ds Max Complete Guide 3D Model
...modify warp distort stop freeze guide tutorial decelerate accelerate acceleration backward time warping in 3ds max complete guide 3d...
3d_export
$15
![Jawa ionization blaster](/t/12638410.jpg)
Jawa ionization blaster
... an ion accelerator which was created using a droid restraining bolt and an accu-accelerator from a capital ship ignition system.
3d_export
$30
![Tesla model S PLAID 2022](/t/11401638.jpg)
Tesla model S PLAID 2022
...model s plaid, with the longest range and fastest acceleration of any electric vehicle, is the most productive sedan...
Test
turbosquid
$99
![test](/t/13242737.jpg)
test
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1251637)
turbosquid
$63
![TEST](/t/13245138.jpg)
TEST
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1446233)
turbosquid
$1
![test](/t/13241029.jpg)
test
...st
turbosquid
royalty free 3d model test for download as fbx on turbosquid: 3d models for games, architecture, videos. (1360941)
3d_export
free
![johnny test](/t/11930490.jpg)
johnny test
...johnny test
3dexport
johnny test 3d
turbosquid
$15
![Test](/t/13237916.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![test](/t/13239443.jpg)
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Test](/t/13235512.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![test](/t/13232005.jpg)
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Test](/t/13259250.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![gripper test](/t/11462193.jpg)
gripper test
...gripper test
3dexport
robot gripper test model
Ringing
3d_export
$5
![ring](/t/11922677.jpg)
ring
...ring
3dexport
ring
3d_export
free
![ring](/t/11458063.jpg)
ring
...ring
3dexport
ring
3d_export
free
![ring](/t/11458533.jpg)
ring
...ring
3dexport
ring
3d_export
free
![ring](/t/11458686.jpg)
ring
...ring
3dexport
ring
3d_export
$10
![ring](/t/11932426.jpg)
ring
...ring
3dexport
lord of the rings
3d_export
$5
![ring](/t/11697371.jpg)
ring
...ring
3dexport
golden ring
3d_export
free
![ring](/t/11459194.jpg)
ring
...ring
3dexport
cherub ring
3d_export
$10
![ring](/t/11713504.jpg)
ring
...ring
3dexport
3d ring model
3d_export
$5
![ring](/t/11920403.jpg)
ring
...ring
3dexport
ring 3d model
3d_export
$5
![ring](/t/11420678.jpg)
ring
...ring
3dexport
ring top black...
Part
3d_export
$5
![Parts](/t/11387459.jpg)
Parts
...parts
3dexport
parts
3d_export
$5
![Part](/t/11371717.jpg)
Part
...part
3dexport
part
3d_export
$5
![Part](/t/11371716.jpg)
Part
...part
3dexport
machine part
3d_export
$65
![Part](/t/11374202.jpg)
Part
...part
3dexport
simple rendering of the scene file
3d_export
$65
![Part](/t/11374203.jpg)
Part
...part
3dexport
simple rendering of the scene file
3d_export
$30
![fan part](/t/11462622.jpg)
fan part
...fan part
3dexport
this is a part of fan of pedastal
3d_export
$10
![machine parts](/t/11696262.jpg)
machine parts
...machine parts
3dexport
3d part modeling work ,contact for 3d work
turbosquid
$59
![Mechanical Part](/t/13505474.jpg)
Mechanical Part
...id
royalty free 3d model mechanical part for download as c4d on turbosquid: 3d models for games, architecture, videos. (1410833)
turbosquid
$17
![Road parts](/t/13318193.jpg)
Road parts
...bosquid
royalty free 3d model road parts for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1192967)
turbosquid
$9
![Cutter Parts](/t/13265273.jpg)
Cutter Parts
...squid
royalty free 3d model cutter parts for download as stl on turbosquid: 3d models for games, architecture, videos. (1220010)