Rigidbot tool caddy by bobnojio

Last crawled date: 3 years ago

Made a tool that should (hopefully) clip onto my Rigidbot and hold my tools.
Slots on this are:
calipers
hex wrenches/allan wrenches
Scissors or USB Stick (should fit both)
small putty knife or feeler gauge sticks (should fit either)
small bottle of Lubricant
and lastly, either a spatula holder or toothbrush holder. Im going to use it to hold my cricut spatula.
the Inner measurements of the square are at 20mm, which should be just a bit large for the Rigidbot.
Notes from my first print:
the 'USB' slot is a bit too small to fit a USB Stick in to. will widen and re-upload.
similarly, the inner Round hole to hold Lube is too small for my lube. it fits a Sharpee quite nicely though.
the round holes work quite well for Allan Keys.
Caliper fits nicely.
Added a V2 file -- wider hole for feeler gauge, wider hole for Lube.