Rigid Dual spool Drybox Ikea 365+ 10.6L food container by Tobi0892

Last crawled date: 3 years, 3 months ago

Rigid Dual Spool Dryboxes
I printed the original ones but my extruder pulled the spools from the guiding rolls. Thus I designed more constraining ones that limit the spools' movement solely to rolling.
It is rather a complete redesign than a remix, nevertheless the original design inspired me very much.
The spool holder can be adjusted to any spool size via the nuts.
I added the Fusion 360 model to enable customization.
Hints:
I am operating five of these since 3 months and everything is working well.
PLA is sufficient as you should keep the filament anyways any from excessive sunlight / temperature
Use silica gel in the containers to keep humidity between 10-20%
Electronics:
DHT22 and 5.1k Ohm resistor optional, can be connected to the octopi
My pi reads all 5 DHT22 one after another and sends the data to my home assistant via MQTT (https://github.com/Tobi0892/octoprint-mqtt-enclosure)
Temperature / humidity readings can be integrated into the octoprint enclosure plugin, OctoDash or Home Assistant (for the latter see link above)
What to Print:
see .f3d model for reference
16x Filament Roller 2 Piece 0.25mm.stl
1x 608 Mounting Spacer.stl
1x Spool Holder.stl
2x PC4-M6 Bowden Schnellverbinder Nut.stl
2x PC4-M6 Bowden Schnellverbinder Washer.stl
1x Silica Container Cover.stl
1x Silica Container.stl
1x DHT22 Case.stl
1x DHT22 Lid.stl
1x DHT22 Nut.stl
What to Buy for each Box:
IKEA box: https://www.ikea.com/de/de/p/ikea-365-behaelter-gross-rechteckig-kunststoff-10393064/
2x 158mm 8mm rods (usually sold in 1m in hardware stores)
12 M8 nuts
20 M8 washers
8x 608 bearings
~ 180g silica gel
2x PC4-M6 with 4mm hole
DHT22, 5.1k ohm resistor, cable and dupont connector (optional)
6x 6x3mm magnets for silica gel container (optional) https://www.amazon.de/gp/product/B07D33PG7Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Home Assistance Dashboard: