Thingiverse
RighteousWaffles' Sparkfun Si7021 Sensor Enclosure by RighteousWaffles
by Thingiverse
Last crawled date: 3 years ago
This is a very simple enclosure for the Sparkfun Si-7021 I2C temperature / humidity sensor.
I was curious about the humidity levels inside a toolbox in my shop so I did what any respectable nerd would do: I set up a Raspberry Pi with a temp / humidity sensor. Now I can monitor and plot graphs of the temp and humidity in my toolbox from anywhere in the world. I also get SMS and Email alerts if either goes out of range. And because this is inside the toolbox it doesn't have to look pretty - it only needs to protect the sensor from getting accidentally whacked by a tool.
This is a super simple design that only took a few minutes and it prints quickly with a larger layer height and not much infill. Remember that it just protects the sensor so it doesn't have to be pretty.
I was curious about the humidity levels inside a toolbox in my shop so I did what any respectable nerd would do: I set up a Raspberry Pi with a temp / humidity sensor. Now I can monitor and plot graphs of the temp and humidity in my toolbox from anywhere in the world. I also get SMS and Email alerts if either goes out of range. And because this is inside the toolbox it doesn't have to look pretty - it only needs to protect the sensor from getting accidentally whacked by a tool.
This is a super simple design that only took a few minutes and it prints quickly with a larger layer height and not much infill. Remember that it just protects the sensor so it doesn't have to be pretty.
Similar models
thingiverse
free
humidity sensor mount 20x20 t-nut by acwalter
... but i think some are on the sides so i added some there too. it is fairly tight tolerances so the sensor snaps in nice and snug.
thingiverse
free
Enclosure ESP8266 Temp/Humidity Sensor by anilsarma
...
thingiverse
enclosure to encase esp8266 some sensors and battery, meant for a temp humidity sensor the reason i built the slot,
thingiverse
free
Louvred humidity/temperature sensor enclosure for si7021 etc. by CptPicard
...or mounts as i wanted it to be generic and usable for different sensors, use a knife or small drill to make holes where required.
thingiverse
free
Lack Control Panel by Rambelaya
...s i used: https://www.amazon.ca/gp/product/b086v7kbf9
link to rocker switches i used: https://www.amazon.ca/gp/product/b01krl8mba
thingiverse
free
Humidity Sensor Holder for Ender 5 by tavisto
... will probably work on others as well, but i don't have any to test.
the sensors i got are the simple little round ones here
thingiverse
free
Digital Temperature/Humidity Gauge Holder
...l.
i was able to print this without supports, but if your printer has problems bridging, you might consider adding some supports.
thingiverse
free
Lumos helmet remote keychain by Amirsf
... to store it - it doesn't have any loops that can be used to tie it inside my backpack.
so i designed this keychain holder :)
thingiverse
free
Sensor clip 8mm by TheGreatMaker
...sensor clip 8mm by thegreatmaker
thingiverse
a simple clip to hold the probe from a cheap chinese humidity and temp sensor.
thingiverse
free
Engmate CNC breakout board enclosure
...out board didn't have an enclosure. it might be a pretty common one, so here is a simple way to protect and mount that board.
thingiverse
free
12864 LCD Vertical Enclosure by kbroadst
...hangs down, but couldn't find anything that would work. so i designed this enclosure. pretty simple, but will do the trick...
Righteouswaffles
thingiverse
free
RighteousWaffles' Pill Holder Version 2 by RighteousWaffles
...that i will make the edits to this as soon as i can. i would recommend against printing this until i can get the edit completed.
thingiverse
free
RighteousWaffles' Ice Scraper by RighteousWaffles
...ell after light use. the scraper pictured was sprayed with plasti dip to prevent the thing from sliding around when using gloves.
thingiverse
free
RighteousWaffles' Eye Glasses Case by RighteousWaffles
...project you'll need:
a 1/4" number 4 wood screw
a dab of glue - cyanoacrylate (krazy glue), or expoxy
sticky backed felt
thingiverse
free
RighteousWaffles' Pill Holder Version 1 by RighteousWaffles
...r her.
i measured aspirin and found found them to be about 9.5mm x 5mm. be sure to measure yours and scale the print accordingly.
thingiverse
free
RighteousWaffles' MonoPrice i3 Mini Glass Bed Holders by RighteousWaffles
...reezer to make prints easier to remove while printing another thing on another sheet of glass.
easily wash the bonding agent off.
Si7021
thingiverse
free
BME280 BMP180 Si7021 sensor cover
...bme280 bmp180 si7021 sensor cover
thingiverse
cover for bme280/bmp180/si7021 sensors, with labels of pinout
thingiverse
free
Si7021 temperature & Humidity sensor by KnowledgeSeeker
... th16 . this mount is for the side of a 25 ltre brewing bucket so the temp sensor can be removed to another bucket when finished.
thingiverse
free
Adafruit Si7021 sensor case with mount by eimose
...unt the case by pressing the wedge through the tube. this could for instance be a plexiglass plate with a 8mm hole drilled in it.
thingiverse
free
Sensor Housing for ESP8266 and Si7021 by PhysUdo
...e iot main server can be found on my blog (https://physudo-e.blogspot.com/2020/08/home-automation-with-raspberry-pi-and_30.html).
thingiverse
free
Thermometer WIFI ESP8266 Wemos D1 mini and Si7021
...ng for the usb-cable.
the lid is also adjusted for a homemade shield that can be used with different sensors, for example si7021.
thingiverse
free
Wall outlet cover PIR Si7021 biltema 46-906 by ohotbar
...then fasten the pir and si7021 with hot-glue to the 3d printed part on the inside, as there is no room for screwing this together
thingiverse
free
Adafruit Si7021 Sensor Case by nixternal
...o i created a plugin that will print it's readings on the nav bar of octoprint.
https://github.com/nixternal/octoprint-si7021
thingiverse
free
Louvred humidity/temperature sensor enclosure for si7021 etc. by CptPicard
...or mounts as i wanted it to be generic and usable for different sensors, use a knife or small drill to make holes where required.
thingiverse
free
MYSensors temperature humidity sensor by schumo99
...need to close sj1. for more information please see also:https://www.openhardware.io/view/354/mysensor-rfm69hcw-micro-pcb-for-dht-si7021cny70 ...
Sparkfun
thingiverse
free
Sparkfun RedBoard Artemis with Sparkfun display by NotLikeALeafOnTheWind
...d two of them. it has two penny wells to help with balance.
an example can be found here.
https://www.sparkfun.com/products/16427
thingiverse
free
Arduino Pro Mini Sparkfun
...arduino pro mini sparkfun
thingiverse
arduino pro mini by sparkfun
thingiverse
free
Sparkfun Cookie Cutter by Landru
...ctronics,
but they say they don't mind if you use it for personal
noncommercial purposes.http://www.sparkfun.com/static/about
thingiverse
free
enclosure for sparkfun buspirate by ataraxis
...sparkfun buspirate by ataraxis
thingiverse
moved to youmagine:https://www.youmagine.com/designs/enclosure-for-sparkfun-buspirate
thingiverse
free
Sparkfun 4x4 Button Pad by almajiro
...sparkfun 4x4 button pad by almajiro
thingiverse
sparkfun 4x4 button
thingiverse
free
Sparkfun Electroincs Robo Joust Trophy by Sparkfun
...inner of the inaugural robo joust. congrat john. if you looks at the trophy, it's john's robot grabbing onto another bot.
thingiverse
free
Sparkfun MP3 Trigger Board Mount
...sparkfun mp3 trigger board mount
thingiverse
this is a mount for the sparkfun mp3 trigger board.
thingiverse
free
Sparkfun 12 Button Keypad by deisterhold
...sparkfun 12 button keypad by deisterhold
thingiverse
sparkfun keypadhttps://www.sparkfun.com/products/8653
thingiverse
free
IOIO base plate by Sparkfun
...o base plate by sparkfun
thingiverse
a nice little base plate for your ioio board. created by paul smith at sparkfun electronics
thingiverse
free
Sparkfun Bus Pirate case by bitlischieber
...sparkfun bus pirate case by bitlischieber
thingiverse
case for the sparkfun bus pirate by dangerous prototypes
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Sensor
3d_export
free
parking sensor
...parking sensor
3dexport
car parking sensor
turbosquid
$1
Sensor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Smoke sensor
...port
smoke sensor, can be an impressive element for your projects. easy to use, realistic image, low polygon, quality materials.
3d_export
$5
Air Quality Sensor v1
...air quality sensor v1
3dexport
air quality sensor v1
3d_export
$15
float sensor
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$26
Wind sensor C
...free 3d model wind sensor c for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328943)
turbosquid
$26
Wind sensor B
...free 3d model wind sensor b for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328168)
3d_export
$5
ultrasound sensor
...ivers convert ultrasound into electrical signals, and transceivers can both transmit and receive ultrasound. export in: -obj -fbx
3ddd
free
Вытяжка Shindo pallada sensor
... вытяжка
вытяжка shindo pallada sensor. в двух размерах - 600 и 900. текстуры в комплекте.
turbosquid
$52
Wind sensor A B C
...
royalty free 3d model wind sensor a b c for download as fbx on turbosquid: 3d models for games, architecture, videos. (1408406)