Thingiverse
Ridgid 18v Battery Connector by sprocketscientist
by Thingiverse
Last crawled date: 3 years ago
I wanted to be able to use my Ridgid 18v batteries in other projects, and I found Simhopp's model. However, I didn't want to have to buy the actually battery connector part.
So, I reverse engineered the connector, using contacts from an electrical socket (US style) that are glued in. I modified the adapter plate so that it would be flat where the battery connector can be superglued on in position.
Solder wires onto the contacts before gluing them to the battery connector body.
Dry fit the parts onto a battery, and sand them down if necessary. If there are any gaps to fill, apply superglue and sprinkle in baking soda.
Ridgid_battery_mount_2 is an edit of the battery mount that adds screw holes and removes some material. This is suitable to make a battery holding rack by attaching several of these to scrap wood or your workbench or whatever.
So, I reverse engineered the connector, using contacts from an electrical socket (US style) that are glued in. I modified the adapter plate so that it would be flat where the battery connector can be superglued on in position.
Solder wires onto the contacts before gluing them to the battery connector body.
Dry fit the parts onto a battery, and sand them down if necessary. If there are any gaps to fill, apply superglue and sprinkle in baking soda.
Ridgid_battery_mount_2 is an edit of the battery mount that adds screw holes and removes some material. This is suitable to make a battery holding rack by attaching several of these to scrap wood or your workbench or whatever.
Similar models
thingiverse
free
Ridgid 18V Tool Mounts
..., i designed these. they work great printed in pla+ and have held up over hundreds of uses. should work with any ridgid 18v tool.
thingiverse
free
Ryobi 18V Powered Portable Radio
...
not all radios will have enough room to add an 18v ryobi battery connector. you can also add the battery outboard of the radio.
thingiverse
free
Ryobi Battery to Makita or Dewalt Tools 18V Adapter by Jorkoff
...ld dewalt battery for the contacts dewalt contacts. and used cell leaf spring battery contacts for the makita and ryobi contacts.
thingiverse
free
Mastercraft MAXIMUM Li-Ion 18V battery connector by Miek770
...tics project, so i modeled my drill's battery and designed a custom connector for it. the battery locks in place beautifully.
thingiverse
free
RIDGID 18V Battery Holder
...slight (5 degree) angle. it is intended to be mounted to a wall or the vertical face of a cabinet.
designed with creo parametric.
thingiverse
free
Ryobi 18V Battery Connector
... screws and matching nuts.
i plan to use high efficiency dc-dc converters to generate 5v, 12v and 9v from the ryobi 18v battery.
thingiverse
free
Ridgid 18v battery mount by chickenbisket
...enbisket
thingiverse
a mount to hold your 18v batteries on a wall or under a cabinet. screws to the wall with 3 #10 wood screws.
thingiverse
free
Ozito 18v battery to Ryobi adaptor
...9 for the great model.
the contacts were made from nickel strip although anything could be used, copper or some spade connectors.
thingiverse
free
Traxxas male battery connector
...not want to wait to go purchase one, so i made one. i did however have some of the metal contacts needed from a previous project.
thingiverse
free
Bosch 18V to 12V battery adpter by starij
...truments and batteries for it, but only one 18v. so with that adapter i use 18v bosch with two 12v batteries.
step file included
Sprocketscientist
thingiverse
free
A button. For clothes. by sprocketscientist
...a button. for clothes. by sprocketscientist
thingiverse
it's a button about 17 mm in diameter, 3 mm thick, with 4 holes.
thingiverse
free
Solder Holder And Tip Cleaning Station by sprocketscientist
...procketscientist
thingiverse
just a combination of the solder cleaning station by juicyskyberries and solder holder by topenjoin
thingiverse
free
shop vac bare floor attachment, 10 inch by sprocketscientist
...etscientist
thingiverse
it's a 10 inch shop vac attachment.
orient it so the part that would touch the floor is on the bed.
thingiverse
free
Shop-Vac to Intex Inflator Adaptor Nozzle by sprocketscientist
...hop vac accessory size to a 15mm outer diameter nozzle, that accepts a hose from a hand pump for inflating pool toys and whatnot.
thingiverse
free
Grand Castle Planter/Pot by sprocketscientist
... drain hole in the bottom. i didn't provide a water tray, as i am going to use this for a succulent that needs good drainage.
thingiverse
free
Hydroponic Net Cup for vase mode printing by sprocketscientist
...mbossed rectangles.
i have these in use in several kratky hydroponic setups for veggies.
recommend a wall thickness of about 1mm.
thingiverse
free
Ceiling Fan Remote Holster or Holder by sprocketscientist
...you may want to print it on it's back, but i printed it standing up so i didn't need supports for the little front rails.
thingiverse
free
Iconic 608 bearing caps: Pikachu, Darth Vader, Superman, Transformers by sprocketscientist
...ing them yourself falls under fair use.
print image side down with a slow first layer. or print them image side up with support.
thingiverse
free
Interchangeable Arm Penny Fidget Spinner by sprocketscientist
... year or something. the metal composition has changes many times over the years, so they have a pretty large variance in weight.
Ridgid
thingiverse
free
Ridgid Wall Mount
...ridgid wall mount
thingiverse
wall mount for the ridgid drill screwdriver
thingiverse
free
Ridgid tool
...ridgid tool
thingiverse
it just works
thingiverse
free
RIDGID 12v battery mount
...ridgid 12v battery mount
thingiverse
a 12v battery mount for ridgid.
thingiverse
free
RIDGID base plate by Edward422
...base plate for ridgid's compact router, this base plate is designed to be used with ridgid's universal guide bushing set.
thingiverse
free
Ridgid Dust Chute by paulandersen
...dersen
thingiverse
the replacement dust chute for a ridgid table saw r4510 is now obsolete. this one is to replace the original.
thingiverse
free
ridgid table saw knob
...ridgid table saw knob
thingiverse
broke the knob of my ridgid table saw...couldnt find a repalcment o mad e my own
thingiverse
free
Ridgid tool box labels by acelerson
...ridgid tool box labels by acelerson
thingiverse
just some name plates that fit on the ridgid tool boxes
thingiverse
free
Ridgid 14" bandsaw blade hanger by toekneesee
...hanger to replace the ones on the back of your ridgid 14" (bs1400) bandsaw. the ridgid part number for this item is: 826530.
thingiverse
free
Makita compact router ridgid vacuum adapter
...makita compact router ridgid vacuum adapter
thingiverse
makita compact router ridgid vacuum adapter
thingiverse
free
Ridgid R2401 Base by pc-tech
...r2401 base by pc-tech
thingiverse
ridgid r2401 laminate trim router base
made the center hole bigger to accommodate bigger bits.
18V
thingiverse
free
18V drill holder by Sautech
...18v drill holder by sautech
thingiverse
18v drill holder
thingiverse
free
HITACHI to PARKSIDE 18v by Gurdil121
...side 18v by gurdil121
thingiverse
adaptator battery hitachi 18v to parkside 18v
adaptateur de batterie parkside vers hitachi x18
thingiverse
free
Bosch Akkuschrauber 18V by dx55
...bosch akkuschrauber 18v by dx55
thingiverse
ein halter für ein 18v akkuschrauber von bosch..
thingiverse
free
Einhell 18V Akkuhalter by DaBruenni
...einhell 18v akkuhalter by dabruenni
thingiverse
wandhalter für die 18v einhell akkus
am besten aufrecht stehend drucken.
thingiverse
free
Dewalt 18v TEST!
...dewalt 18v test!
thingiverse
test version 1.0
thingiverse
free
Bosch-18V-Akkuhalter-Modul-verriegelt.stl
...bosch-18v-akkuhalter-modul-verriegelt.stl
thingiverse
bosch-18v-akkuhalter-modul-verriegelt
thingiverse
free
Bosch 18V battery wallmount
...ngiverse
wallmount for bosch proffesional 18v battery. print standing for no support...
update: smaller mount for less material.
thingiverse
free
Ryobi 18v adapter
...ryobi 18v adapter
thingiverse
to fit with https://www.thingiverse.com/thing:3822673
thingiverse
free
Battery model for GMC 18V by _mage_
...battery model for gmc 18v by _mage_
thingiverse
docking section of a gmc 18v battery for eventual use as a battery adapter.
thingiverse
free
Makita 18V battery connector (1x 18v, 2x 18v) single and dual by emielbeus
... i ain't fancy to make another one just for the picture.
the file package also contains a fillet free model for modification.
Connector
thingiverse
free
Connector by nagato
...connector by nagato
thingiverse
connector
thingiverse
free
connectors
...connectors
thingiverse
m
thingiverse
free
Bulkhead connectors
...bulkhead connectors
thingiverse
bulkhead connectors
thingiverse
free
Connector by Graham2020
...connector by graham2020
thingiverse
connector for 6mm dowel
thingiverse
free
connector cap
...connector cap
thingiverse
this is a cap for the connector of the optimate charger
thingiverse
free
X-connector, cross connector
...x-connector, cross connector
thingiverse
kreuzverbinder zur verbindung von drei 6 mm dicken brettchen
thingiverse
free
T-connector, butt connector
...t-connector, butt connector
thingiverse
mit den stossverbinder kann man zwei 6 mm brettchen miteinander verbinden
thingiverse
free
Connector by UserWL
...connector by userwl
thingiverse
connector with 0.154in radius and 0.125in radius ends.
thingiverse
free
Loop connectors
...erse
made my own connectors for the great loop! like the idea to use the standard connector, should be more "flexible"
thingiverse
free
Turret connector by NicklasGaardh
...turret connector by nicklasgaardh
thingiverse
connector for turrent
Battery
thingiverse
free
Battery Container - (Battery Shaped)
...ttery shaped)
thingiverse
a battery container in the shape of a chunky battery. it contains up to 4 aaa batteries and 5 aa ones.
thingiverse
free
FT009 BATTERY SUPPORT FOR GREATER BATTERY
...ter battery
thingiverse
[en] ft009 battery support for greater battery
[fr] support batterie ft009 pour une plus grande batterie
thingiverse
free
Battery pack for 2xAA batteries by hawkan
...attery pack for 2xaa batteries by hawkan
thingiverse
battery pack for two aa batteries., practical for diy electronics projects.
thingiverse
free
Battery Holder
...battery holder
thingiverse
this is a battery holder for multiple types of batteries.
thingiverse
free
Batterie holder / Batterie Magazin by banto
...tterie holder
110 mm x 180 mm
21 x batterie aa 1.5 volt
36 x batterie aaa 1.5 volt
6 x batterie 9.0v block
10 x batterie 3.7 volt
thingiverse
free
Battery organizer
...battery organizer
thingiverse
simplest battery organizer for 10aa and 12 aaa batteries
thingiverse
free
Battery holder for H8 Mini batteries by RobinLin
...ini batteries by robinlin
thingiverse
this is a battery holder for lipo batteries usable for the original 150mah jjrc batteries.
thingiverse
free
For battery by Krabsters
...for battery by krabsters
thingiverse
for battery
thingiverse
free
Battery by leonk
...battery by leonk
thingiverse
battery
thingiverse
free
battery pack for three 18650 batterys by ricardo__xyz
...battery pack for three 18650 batterys by ricardo__xyz
thingiverse
this is a battery pack for three 1865er batterys.