Thingiverse
Ricoh Theta S / Theta V Arca and Peak Design Clip mount by Hassi
by Thingiverse
Last crawled date: 4 years, 7 months ago
Adapter to mount a ricoh theta s or other ricoh 360 degree cameras with the same form factor on an arca tripod mount and a peak design capture.
standard parts:
You need a 1/4" bolt with a thread length of 9.4mm or shorter.
features:
Works with Arca tripod mounts and peak design capture clip system.
While mounted you can access the HDMI-Port as well as the USB-Micro port for charging and data transfer.
Also you can read the serial number of the camera for connecting via the smartphone app.
Additionally you there is an eyelet for a hand strap or safety leash.
disclaimer:
You can customize the the design in Solidworks. If you do, please share your design as well. Thanks :)
Should this design infringe any intellectual property, please contact me and i will take this design down.
I used this file as a starting point:https://grabcad.com/library/pov-plate-for-peak-design-capture-1
standard parts:
You need a 1/4" bolt with a thread length of 9.4mm or shorter.
features:
Works with Arca tripod mounts and peak design capture clip system.
While mounted you can access the HDMI-Port as well as the USB-Micro port for charging and data transfer.
Also you can read the serial number of the camera for connecting via the smartphone app.
Additionally you there is an eyelet for a hand strap or safety leash.
disclaimer:
You can customize the the design in Solidworks. If you do, please share your design as well. Thanks :)
Should this design infringe any intellectual property, please contact me and i will take this design down.
I used this file as a starting point:https://grabcad.com/library/pov-plate-for-peak-design-capture-1