Thingiverse

Revopoint POP Bumper by dondonyaki
by Thingiverse
Last crawled date: 3 years, 11 months ago
これはRevopoint POP 3Dスキャナの保護用バンパーです。
This is a bumper for the Revopoint POP 3D Scanner.
スタンドを装着する場合に窪みを設けて干渉を避けています。しかしながら強度に不安があるので前面はくぼみ無し版を使用することをおすすめします。
When the stand is mounted, a depression is provided to avoid interference. However, there is a concern about the strength of this product, so we recommend using the version 'no dimple' on the front.
Concept
とにかく軽量
Lighter weight.
角や面へのダメージを防ぐ
Guard every corner.
接地面積をなるべく減らして熱対策
Unaffected by high heat.
正面・背面関係なく装着可能
Can be mounted on front or back.
ネジ穴を隠す
Hide the screw holes.
Request
リクエストがあればコメントかツイッターでもいいのでお知らせください。
If you have printed and fitted them, it would be helpful if you could comment on any areas that need adjustment.
パーツは1.3mmと薄く作っているので加圧印刷(ノズル温度を高く・印刷速度を速く・積層ピッチを小さく・押し出し量を増やす)をおすすめします。
The parts are also thin and weak, so please try pressure printing (higher nozzle temperature, faster printing speed, smaller stacking pitch, higher extrusion volume).
This is a bumper for the Revopoint POP 3D Scanner.
スタンドを装着する場合に窪みを設けて干渉を避けています。しかしながら強度に不安があるので前面はくぼみ無し版を使用することをおすすめします。
When the stand is mounted, a depression is provided to avoid interference. However, there is a concern about the strength of this product, so we recommend using the version 'no dimple' on the front.
Concept
とにかく軽量
Lighter weight.
角や面へのダメージを防ぐ
Guard every corner.
接地面積をなるべく減らして熱対策
Unaffected by high heat.
正面・背面関係なく装着可能
Can be mounted on front or back.
ネジ穴を隠す
Hide the screw holes.
Request
リクエストがあればコメントかツイッターでもいいのでお知らせください。
If you have printed and fitted them, it would be helpful if you could comment on any areas that need adjustment.
パーツは1.3mmと薄く作っているので加圧印刷(ノズル温度を高く・印刷速度を速く・積層ピッチを小さく・押し出し量を増やす)をおすすめします。
The parts are also thin and weak, so please try pressure printing (higher nozzle temperature, faster printing speed, smaller stacking pitch, higher extrusion volume).