Thingiverse
Revised Fully Printable Eggbot by Glasswalker
by Thingiverse
Last crawled date: 3 years ago
This is a fully printable eggbot, which was inspired by the original Eggbot as well as the other designs by Zaggo and Berserker.
I designed this one to be complete, and fully printable. And easily assembled. Also all parts are no larger than 100mm in any direction so should be printable on any 3D Printer out there. Lastly I wanted to keep the amount of plastic used to a minimum where possible.
It's intended to be printed in PLA on my Ultimaker.
It's unfinished in that I haven't printed it myself to test it. Normally I don't release things until they are "done" but since Easter is coming up fast, I thought I better get this one out there so hopefully some others can build one in time. I'm hoping to make mine this weekend, and will post pics once it's assembled.
It's intended to be used with the spherebot electronics and firmware. http://www.thingiverse.com/thing:7656
Hope you enjoy!
EDIT April 2 2012:
I've refined some of the parts. Updated STLs are uploaded. The Egg cup parts didn't work out as planned, replaced them with suction cup based ones. Also I strengthened and thickened up the Back Plate part as it was a little flimsy (still works in it's original form, as I left it on mine, but I figured it could use some strengthening for general use).
EDIT April 4 2012:
Ok another minor revision to a few parts. I've uploaded the new designs now. Also here are some pics of the finished build. I'm still just wrapping up the electronics. The changes I made were shortening the egg cup holders to allow for a larger egg to fit, and I had to adjust the arm pivot to allow the motor shaft to protrude through it. You will need washers on those screws now but it will allow a better depth adjustment for the pen to allow it to center up nicely on the egg (keeping the image from skewing when you print it).
EDIT April 4 2012:
Sketchup Sources uploaded.
EDIT March 21 2016
I know it's been a long time, and this design is apparently still popular, so I'm planning on doing a full refresh of this design. I'll be posting it sometime in the near future. I'll be completely overhauling it for better stability, printability, and I intend to make it fully Parametric for easier tuning/customization.
Also quick shameless plug, anyone looking for anything to be printed, please check out my 3D Hub at: https://www.3dhubs.com/ottawa/hubs/glasswalker
Thanks!
I designed this one to be complete, and fully printable. And easily assembled. Also all parts are no larger than 100mm in any direction so should be printable on any 3D Printer out there. Lastly I wanted to keep the amount of plastic used to a minimum where possible.
It's intended to be printed in PLA on my Ultimaker.
It's unfinished in that I haven't printed it myself to test it. Normally I don't release things until they are "done" but since Easter is coming up fast, I thought I better get this one out there so hopefully some others can build one in time. I'm hoping to make mine this weekend, and will post pics once it's assembled.
It's intended to be used with the spherebot electronics and firmware. http://www.thingiverse.com/thing:7656
Hope you enjoy!
EDIT April 2 2012:
I've refined some of the parts. Updated STLs are uploaded. The Egg cup parts didn't work out as planned, replaced them with suction cup based ones. Also I strengthened and thickened up the Back Plate part as it was a little flimsy (still works in it's original form, as I left it on mine, but I figured it could use some strengthening for general use).
EDIT April 4 2012:
Ok another minor revision to a few parts. I've uploaded the new designs now. Also here are some pics of the finished build. I'm still just wrapping up the electronics. The changes I made were shortening the egg cup holders to allow for a larger egg to fit, and I had to adjust the arm pivot to allow the motor shaft to protrude through it. You will need washers on those screws now but it will allow a better depth adjustment for the pen to allow it to center up nicely on the egg (keeping the image from skewing when you print it).
EDIT April 4 2012:
Sketchup Sources uploaded.
EDIT March 21 2016
I know it's been a long time, and this design is apparently still popular, so I'm planning on doing a full refresh of this design. I'll be posting it sometime in the near future. I'll be completely overhauling it for better stability, printability, and I intend to make it fully Parametric for easier tuning/customization.
Also quick shameless plug, anyone looking for anything to be printed, please check out my 3D Hub at: https://www.3dhubs.com/ottawa/hubs/glasswalker
Thanks!
Similar models
thingiverse
free
Arduino Uno mount for Glasswalkers Revised Fully Printable Eggbot by markbenson
...y printable eggbot by markbenson
thingiverse
a mount for arduino uno electronics for glasswalkers revised fully printable eggbot
thingiverse
free
Mount for printable Eggbot by User0180
...mount for printable eggbot by user0180
thingiverse
this is a mount for revised fully printable eggbot by glasswalker.
thingiverse
free
Eggbot Pen arm to fit Futaba micro servo by markbenson
...servo fixings moved so i could use an old, bigger, futaba micro servro that i had lying around instead of the really tiny servos.
thingiverse
free
Modified Endplate for Fully Printable Eggbot by CodeCreations
...http://shop.moderndevice.com/products/rbbb-kit and the pololu drivers can be found at http://www.pololu.com/catalog/product/1182.
thingiverse
free
Another spherebot eggbot armature by Praesmeodymium
...me backlash in the original pen design that i could only fix by crushing the pen so the pen holder has had some adjustments made.
thingiverse
free
Standing/Sitting Chick Egg Cup by Fabricatis
...ngle to improve the center of gravity
• changes the top of the leg to be slightly tapered & elongates the back of the feet.
thingiverse
free
April Fool's Cup by BarbleBapkinsPI
...t it to show some of the parts of the cup. there is a link to the video in the misc notes if you are interested in watching that.
thingiverse
free
hipsta by pomalin
...rint, should print better, and be taller.
edit : bobble head hipsta uploaded
edit 2 : add each three parts to fit a thing-o-matic
thingiverse
free
PCB mount for printable eggbot by bitswype
...verse
a mount for the electronics of the revised fully printable eggbot. the file is parametric so it can be used with any pcb.
thingiverse
free
SW Tie Fighter Revision 3 by Jace1969
... i'm still learning and polishing the smoothing teqniques but that maybe something i will get better at in v4 ; )
cheers jace
Glasswalker
thingiverse
free
OpenWhoop Parametric Micro Racing Multirotor Drone by Glasswalker
... else) printed, don't hesitate to check out my hub on 3d hubs: https://www.3dhubs.com/service/glasswalker
thanks for looking!
thingiverse
free
Eggbot/Spherebot/polargraph PCB mount for ver 2.1 and later by markbenson
...pcb: https://github.com/markjb/eggbot-spherebot-polargraph-controller polargraph firmware: https://github.com/markjb/polargraph_server_a1 eggbot/spherebot firmware: https://github.com/markjb/spherebot see glasswalker great 3d printed eggbot http://www.thingiverse.com/thing:20398 if you want to...
thingiverse
free
Mount for printable Eggbot by User0180
...is a mount for revised fully printable eggbot by glasswalker ...
thingiverse
free
Printable Reef Live Rock by Glasswalker
...inted (such as this one) feel free to pop over to my 3d hub at:https://www.3dhubs.com/ottawa/hubs/glasswalker
thanks for looking!
thingiverse
free
Eggbot Pen arm to fit Futaba micro servo by markbenson
...markbenson thingiverse this is a pen arm mount for glasswalker revised fully printable eggbot with the servo fixings moved...
thingiverse
free
Arduino Uno mount for Glasswalkers Revised Fully Printable Eggbot by markbenson
...y printable eggbot by markbenson
thingiverse
a mount for arduino uno electronics for glasswalkers revised fully printable eggbot
thingiverse
free
Fully Parametric Printable Fingerboard (Mini Skateboard) by Glasswalker
...d enthusiasts, or fingerboard enthusiasts out there, please give me your feedback, i'd love to hear it (and your suggestions)
thingiverse
free
Modified Endplate for Fully Printable Eggbot by CodeCreations
...codecreations thingiverse this is a slightly modified endplate for glasswalker#39;s revised fully printable eggbot (spherebot) http://www.thingiverse.com/thing:20398), with the top...
thingiverse
free
Easy Print 40mm Fan Duct for Ultimaker by Glasswalker
...ally robust, and it adds ziptie hooks on the top to help support the motor weight.
works wonders for me, i hope it helps you too.
Eggbot
thingiverse
free
Arduino Robotic Arm (OPEN SOURCE) + Python control APP + EXTRAS by jjrobots
...would need to create the: air hockey robot sphere-o-bot (eggbot mod) iboardbot b-robot evo 2 (and more to come...)...
thingiverse
free
ExtruDraw Extrusion-based Plotter by pittance
...i use eibotboard drive electronics because i have an eggbot you may use this or any other system to...
thingiverse
free
EggBot Parts by KhalidKhattak
...eggbot parts by khalidkhattak
thingiverse
modified parts for eggbot
thingiverse
free
Unicorn Egg for Eggbot by aevictory
...unicorn egg for eggbot by aevictory
thingiverse
a unicorn and rainbow design for eggbot
thingiverse
free
Raspberry Pi Zero - Button Case (lasercut) by snug
...pi zero to start the printing process on an eggbot therefore i installed inkscape with extentions on the pi...
thingiverse
free
Woodland for Eggbot by aevictory
...woodland for eggbot by aevictory
thingiverse
a woodland forest scene for eggbot
thingiverse
free
Cat egg for eggbot by aevictory
...cat egg for eggbot by aevictory
thingiverse
an egg with cats for eggbot
thingiverse
free
Monster egg for eggbot by aevictory
...monster egg for eggbot by aevictory
thingiverse
an egg with monsters for eggbot
thingiverse
free
Rainbow Egg by aevictory
...rainbow egg by aevictory thingiverse a rainbow grid for eggbot ...
thingiverse
free
Bees and Flowers Egg by aevictory
...aevictory thingiverse an egg with flowers and bees for eggbot ...
Revised
cg_studio
$30
Apple iphone 4 Cell Phone LAST revision3d model
...4d .wrl .wrz - apple iphone 4 cell phone last revision 3d model, royalty free license available, instant download after purchase.
3d_export
$9
cosmetics
...;br>i will help you with pleasure if you have any problem. i present unlimited revision.<br>you can see my other works a
3d_export
$5
nintendo swith
...egion lockout.[j] a handheld-focused revision of the system, called the nintendo switch lite, was released on september 20, 2019.
3d_export
free
bed - sample
...gt;- reupload with new fbx format.<br>- edge loops added for better shading.<br>- fix flipped uv map in certain area.
3d_export
$13
guitar
...th pleasure if you have any problem. i present unlimited revision.<br>you can see my other works at <br>best regards.
3d_export
$10
antonio lupi design timbro
...quotation of the fifties but the style has been revised in a contemporary design. romantic and elegant taste is...
3d_export
$10
antonio lupi design timbro
...quotation of the fifties but the style has been revised in a contemporary design. romantic and elegant taste is...
3d_export
$10
room interior design model 001
...for the revision by contact me with email, i will do it with pleasure.<br>thanks for support<br>i hope you like it :)
3d_export
$60
mitsubishi galant 1996 - 1999 -- 8th generation -- sedan
...the 7th generation (compared to the 6th), the concern revised the design of the new generation of the galant,...
3d_export
$40
FIAT PALIO ELX 18 2009
...as been discontinued in tofas plant. in 2015 the station-wagon variant has been renamed as fiat weekend, dropping the palio name.
Fully
3ddd
$1
Eglo - Nadina
...by eglo. 3ds max 2011 and 2014 models comes fully shaded and ready-to-use for the vray renderer and for...
3d_ocean
$15
tripterygion Rigged
...easily visible to its bright colors the model is fully rigged in max version...
3d_ocean
$25
Container shipping House double floor
...model of container shipping house double floor. model is fully textured with all applied materials: - textures formats: tif...
3d_ocean
$9
Vintage Soccer Ball
...sport sports used vintage vrayforc4d the model has a fully textured, detailed design that allows for close-up renders, and...
3d_ocean
$99
T-34-85 with Interior Winter Camo
...detailed interior(controls, gauges, machine gun, ammo, radio, main gun) fully modeled...
3d_ocean
$19
Multi sport court centrum pack
...3d model of multi sport court field. model is fully textured with all applied materials: - textures formats: tif...
3d_ocean
$49
Interior Vray Scene with 3 RenderReady Views + PSD
...cameras realistic v-ray & 3ds max 2014 interior scene, fully textured with high resolution textures, realistic shader setup, with...
3d_ocean
$19
Low Poly Car
...to run on mobile devices or browsers. it is fully textured and self-lluminated. the model has 1268 triangles. it...
3d_ocean
$19
Cartoon T-Rex Rigged
...made with 3d studio max 8. the model is fully rigged and finely skined in max version. in max...
3d_ocean
$19
Frogs and Mosquito in a complete cartoon scene
...water cartoon scene with 2 frogs and a mosquito fully rigged and animated technical notes the product contains: -...
Printable
3d_export
$15
STL116 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl116 3d model ritaflower 68506...
3d_export
$15
STL100 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl100 3d model ritaflower 68498...
3d_export
$15
STL88 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl88 3d model ritaflower 68495...
3d_export
$15
STL101 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl101 3d model ritaflower 68499...
3d_export
$15
STL87 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl87 3d model ritaflower 68494...
3d_export
$35
Enchenment Wedding Band 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring engagement enchenment wedding band 3d...
3d_export
$15
Earrings i 001 3D Model
...apphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring earrings i 001 3d model...
3d_export
$15
Earrings i 022 3D Model
...apphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring earrings i 022 3d model...
3d_export
$22
Ilaria 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable ilaria 3d model 3dm168 75134...
3d_export
$15
STL288 3D Model
...sapphire white gold sterling silver engagement wedding stl cad printable 3d jewelry design ring stl288 3d model ritaflower 69143...