Thingiverse
Rev pulley case by FTC9794
by Thingiverse
Last crawled date: 3 years, 1 month ago
These are the pulley cases that we have been using on all of our Rev slides. We have used them for prototypes in the Res-Q season and the Velocity Vortex season and we use them on our robot for the Relic Recovery season too.. These cases are simple to assemble, requiring for each pulley:
One of each 3d printed part
2 M3 screws that are long enough
2 small M3 washers - They have to be small enough that they only touch the inner ring on the bearingTo assemble these, you screw them together with the pulley in the inside, with one washer surrounding each pulley.
One of each 3d printed part
2 M3 screws that are long enough
2 small M3 washers - They have to be small enough that they only touch the inner ring on the bearingTo assemble these, you screw them together with the pulley in the inside, with one washer surrounding each pulley.
Similar models
thingiverse
free
Small Pulley Bearing Covers by ftc9881
...available from rev robotics (http://www.revrobotics.com/rev-41-1368/). they should work with similar bearings that have the following dimensions: id: 3mm od:...
thingiverse
free
Magnetic 18650 battery holder by Malinka
...de (use glue if necessary)
if part not moving smooth, add some oil.
warning!!!
this model is print in place, do not use supports.
thingiverse
free
Y-belt tensioner for Anet A6 by RiDDLeRN
...ured from the table.
used the original pulley, m3 screw and two m3 nuts.
4 m4x25
2 4,4mm washer
4 m4 nuts
2 m3x25
2 3,2mm washers
thingiverse
free
FTC Vex 393 Mount for Rev extrusion by LectricLegends8417
...lace on the robot, so we design some very snug mounts that allow us to mount them to rev extrusion.
have a good season!
team 8417
thingiverse
free
Z-axis belt tensioner with larger anti-squeaking pulley seat. by Giovanni1965
...ert between the walls and the pulley two 3 mm washers, one on each side.
you will need four m3 nuts and two 30 mm long m3 screws.
thingiverse
free
FTC REV Robotics Pulley Covers by GuzzolineRobotics
...pulley cover we have designed to attach to the rev robotics channel. attached are the files to print just one, or sixteen covers.
thingiverse
free
Rev Robotics 15mm Pulley Covers by dstewartrobots
...eep them upright and you have to put the string on the pulley, then place in the cover, then attach the assembly to the extrusion
thingiverse
free
Panel One case by stereolab
...d on the original t3p3 design. comes in 3 parts.
print front, back and knob and assemble with four m3x20 screws and four m3 nuts.
thingiverse
free
Anet A8 Y Belt Tensioner by Brisemuth
...the pulley and the dimensions of my design are similar to the original design. that's important in case you...
thingiverse
free
Nema17 peristaltic pump by Cristian2281
...mp and pin. rollers to be printed if not using mr105zz bearings.
this is still a work in progress and should be treated as such.
Ftc9794
thingiverse
free
Servo Clamp by FTC9794
...ps allow you to screw together servo wire connections so they won't come unplugged. they can also be used for 3 wire sensors.
thingiverse
free
FTC Battery holders by FTC9794
...e charger battery holder where there is the slight indent. this could be good for indicating whether a battery is charged or not.
thingiverse
free
Rev Strain Relief With Base by FTC9794
... also, this part isolates the expansion or control hub from the part it is mounted on to prevent static discharges on the module.
thingiverse
free
Rev Expansion Hub Strain Relief low profile by FTC9794
...h space on the robot and it sits flush with the ground. it is lightweight and uses a zip tie to hold the usb connection in place.
thingiverse
free
Relic Recovery Relic Claw by FTC9794
...linkage.stl part.
if you use this claw, please send us an email at wizards.exe@gmail.com telling us and attribute the claw to us.
Rev
3d_export
$5
Rev Gun 3D Model
...rev gun 3d model
3dexport
rev gun
rev gun 3d model sone93 52014 3dexport
3d_export
$15
Maverick REV-6
...n act as the main blaster of a nerfer, but due to the short range, it is recommended to use it as a secondary, additional weapon.
turbosquid
$84
Euro Pallet rev 2009
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Chandra rugs REV-15802
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$60
rev"s drum set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Sova Design/Rev coffee table
... table
3ddd
журнальный
https://www.facebook.com/media/set/?set=a.514295972031044.1073741841.343660145761295&type;=3
turbosquid
$30
Yak-44 (Rev) AEW Aircraft Solid Assembly Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Mitsubishi Mu-2 Aircraft Solid Assembly Model(Rev)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
An-71 Madcap (Rev) AEW Aircraft Solid Assembly Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Antonov An-74 (Rev} STOL Transport Aircraft Solid Assembly Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pulley
3d_export
$1
pulley
...pulley
3dexport
3d_export
$30
Pulley export
...pulley export
3dexport
pulley export design render 3d modelling
3d_export
free
Pulley
...ort
this is a pulley<br>formats: ".3ds", ".fbx", ".obj", ".stl", "blend"
3d_export
$6
roller pulley
...r pulley
3dexport
this is the roller pulley 3d model its used for 3d printers and some other uses for toys and usefull things .
turbosquid
$2
aluminum pulley
...
royalty free 3d model aluminum pulley for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1671716)
turbosquid
$29
pulley wheel
...d model pulley wheel for download as obj, wrl, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1319384)
turbosquid
free
Pulley.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
design and assembly of pulley
...design and assembly of pulley
3dexport
design and assembly of pulley 3d model which is used for drive and driven
3d_export
$10
Pulley 3D Model
...y sewing sewingmachine c4d fbx metal
pulley 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl dixiony 107270 3dexport
3d_export
$10
Pulley 3D Model
...trial machine c4d fbx cinema4d metal
pulley 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl dixiony 107271 3dexport
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.