Retro Motel Sign 3d model
3dmdb logo
Thingiverse
Retro Motel Sign

Retro Motel Sign

by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a motel sign to use on your model train layout or diorama. I built it to use in front of the classic Plasticville motel kit.
For printing in HO, I scaled the rocket in Cura to be 4.2mm thick, and the arrow 7mm thick (including lettering). The arrow was printed in two halves to keep the lettering sharp, which was done by simply positioning the arrow so 50% of the thickness was below the print bed.
The pole is a piece of brass rod ~1.5mm in thickness. The sign pieces are super glued to the rod. Printing the sign in a different scale will require a different thickness.

Tags