Thingiverse
Retraction test - premade Gcode ready to print
by Thingiverse
Last crawled date: 6 years, 6 months ago
This is a complete retraction test. File is Gcode already and ready to be printed with any cartesian printer with minimum misures of 15x15x15 cm.
Test is a oozing tower with 30 different process, the mix of 210 to 190 temp, with 2, 4 or 6 mm retraction distance and 35 to 55 mm/s retraction speed. Those are 2 files, one with 35 and 45 mm/s speed and other with 45 to 55 mm/s retraction speed, pick the one you prefere most to try.
No print setting needed because these are set already.
NB: signal to me any problem you facing printing this. Or maybe and idea to get test better.
Test is a oozing tower with 30 different process, the mix of 210 to 190 temp, with 2, 4 or 6 mm retraction distance and 35 to 55 mm/s retraction speed. Those are 2 files, one with 35 and 45 mm/s speed and other with 45 to 55 mm/s retraction speed, pick the one you prefere most to try.
No print setting needed because these are set already.
NB: signal to me any problem you facing printing this. Or maybe and idea to get test better.