Thingiverse
Retraction TEST by bogas
by Thingiverse
Last crawled date: 4 years, 11 months ago
This retraction test that I used to setup my retraction distance, extra restart distance, retraction vertical lift, retraction speed , Coast at end ( Coasting Distance) and of course temperature for filament.
Testing shapes are places with distance between them 10mm 20mm and 40 mm to test different travel distances
My printers is CTC BIZER which was modified with some upgrades from thingiverse.
Extruders are 2x Titan extruder (chinese clone) and nozzles 2x E3D v6 (chinese clone).
On screenshot from Simplify 3D are settings for EXCELVAN PLA temp 210 there is small stringing between first two shapes but it's acceptable.
Testing shapes are places with distance between them 10mm 20mm and 40 mm to test different travel distances
My printers is CTC BIZER which was modified with some upgrades from thingiverse.
Extruders are 2x Titan extruder (chinese clone) and nozzles 2x E3D v6 (chinese clone).
On screenshot from Simplify 3D are settings for EXCELVAN PLA temp 210 there is small stringing between first two shapes but it's acceptable.