Thingiverse
Retaining Bracket for Quickie P222 Swing-away Hanger (Bolted) by dboitnot
by Thingiverse
Last crawled date: 3 years ago
NB: These are bolted-on versions of my previous brackets. The advantage is that they are held more firmly in place. The disadvantage is that they require a tool to remove.
The swing-away foot rest hangers on the Quickie P222 are difficult to operate with one hand. Once released, off-axis pressure from the foot causes the hanger to go out of the vertical. The latching mechanism does not work properly unless the hanger bushing is pressed against the receiver which requires two hands.
This bracket is designed to slip over the latch assembly and hold the bushing against the receiver. This version was designed to use the existing hex bolts requires a hex key (Allen wrench) to add and remove. I recommend storing the hex key on the underside of the hanger skirt with a magnet so that it's ready to hand when needed.
This bracket was designed to mate with the Quick P222 70 Degree Swing-Away Hanger.
It may also work with hangers which use the same pin & latch mechanism.
The swing-away foot rest hangers on the Quickie P222 are difficult to operate with one hand. Once released, off-axis pressure from the foot causes the hanger to go out of the vertical. The latching mechanism does not work properly unless the hanger bushing is pressed against the receiver which requires two hands.
This bracket is designed to slip over the latch assembly and hold the bushing against the receiver. This version was designed to use the existing hex bolts requires a hex key (Allen wrench) to add and remove. I recommend storing the hex key on the underside of the hanger skirt with a magnet so that it's ready to hand when needed.
This bracket was designed to mate with the Quick P222 70 Degree Swing-Away Hanger.
It may also work with hangers which use the same pin & latch mechanism.
Similar models
thingiverse
free
Retaining Bracket for Quickie P222 Swing-away Hanger by dboitnot
... mate with the quick p222 70 degree swing-away hanger
it may also work with hangers which use the same pin & latch mechanism.
thingiverse
free
Wheelchair Cupholder by dboitnot
...-joystick-mount-qtronix
bought new, these are rather expensive parts. please comment with ideas for alternative mounting options.
thingiverse
free
Improved Wheelchair Cupholder by dboitnot
...-joystick-mount-qtronix
bought new, these are rather expensive parts. please comment with ideas for alternative mounting options.
thingiverse
free
Hex-Key Knob for Hex-Head Nut / Bowden Filament-Tensioner Bolt by Davros66
...gh (inc hex)... but the fusion360 file is provided so you can customize it as per your requirements via parametric design.
enjoy.
cg_trader
$3
Latch
...chanics slide rotation mount bracket clamp plug bushing motor valve shaft monochrome symbol steel chrome metallic furniture other
thingiverse
free
Customizable box with latch
...and lid require some small supports.
there are quite a lot of parameters. i will try to remove some redundant in future versions.
grabcad
free
Spring Bolt
...spring bolt
grabcad
spring bolt used for trailer tail gate or other mechanical latch requirements
thingiverse
free
S&G safe relocker latch retraction bracket by liffa35
...tracts the bolt latch when you have the lid removed on your safe lock. this bracket works on sergeant & greenleaf 6700 series
grabcad
free
Brackets, Hanger and Bushed Bearing
...brackets, hanger and bushed bearing
grabcad
nx models for some basic mechanical parts
thingiverse
free
25mm hex nut tool by dascpp
...t thread in a camera lens. also is useful to remove the standard 25mm nuts in cylindrical threaded cap/inductive/optical sensors.
P222
thingiverse
free
HP P222 Cooler
...hp p222 cooler
thingiverse
hp p222 cooling fan bracket. might be tight, depending on how a printer is calibrated
thingiverse
free
HPE Smart Array P222 Fan Mount by ViSoR42
...
fan mount for the hpe smart array p222.
requires 4010 12v fan and four m3*16 screws for the fan. better to use with fan grille.
thingiverse
free
HPE Smart Array P222 Low Profile Bracket by ViSoR42
...rray p222 low profile bracket by visor42
thingiverse
designed to use with hpe microserver gen8.
can be printed with petg or abs.
thingiverse
free
Retaining Bracket for Quickie P222 Swing-away Hanger by dboitnot
... mate with the quick p222 70 degree swing-away hanger
it may also work with hangers which use the same pin & latch mechanism.
thingiverse
free
Customizable Wedge Mount - RAM Compatible by dboitnot
...designed to add a ram mount to the quickie p222 wheelchair but it can be customized to suit a...
thingiverse
free
Delock 25218 Fan Distribution Board Case
...fdd / odd power) to power extra fans (for p222 raid controller i.e.). the opposite power connector allows to...
thingiverse
free
Wheelchair Cupholder by dboitnot
...swing-away assembly can be disassembled and reversed. catalog link: https://www.quickie-wheelchairs.com/wheelchair-parts/sunrise-medical/quickie-p222se/electronics/qtronix-electronics/swing-away-round-arm-joystick-mount-qtronix bought new, these are rather expensive parts. please comment...
thingiverse
free
60% Keyboard Case by brandonforty2
...zyltech black carbon fiber filament with a hardened nozzle. https://www.zyltech.com/store/p222zyltech_pla_3d_printer_filament_1.75_mm_1_kg_2.2_lbs_-_carbon_fiber.html ...
thingiverse
free
HP MicroServer Gen8 SDM R4 (Drive Mount Bracket Rev 4) by D3rFr1tz
...(50mmx146mm) or 1x dual-port-adapter (96mmx146mm) and fans: 40mmx15mm fan p222m1015 or 30mmx15mm fan p420 drawing was made with inkscape...
Dboitnot
thingiverse
free
CD Target Hooks by dboitnot
...a friend built a frame to play tic-tac-toe using cds as targets. i printed up these simple, quick-printing hooks to hang the cds.
thingiverse
free
Trumpet Mute Hard Case by dboitnot
...rd case for the jo ral tpt-2a bubble mute.
want to know if it will fit your mute? just print the handy gauge and see how it fits.
thingiverse
free
Dyson Accessory Rack by dboitnot
...he wall mount only holds two. i designed this rack to hold the rest. i printed with 20% infill and so far it seems strong enough.
thingiverse
free
Compact Card Holder by dboitnot
...r holding the cards in place while allowing enough expansion to insert a 13-card stack all at once instead of one card at a time.
thingiverse
free
Filament Tube Holder for TAZ FlexyDually V2 by dboitnot
...ment tubes for the taz flexydually v2 toolhead. this design was inspired by the excellent single tube support designed by wolfie.
thingiverse
free
RAM Mount Compatible Cup Holder by dboitnot
...holder designed to mount with a 1/4-20 hex-head machine screw and ram's female threaded ball component (part no. ram-b-337u).
thingiverse
free
Digital Sundial Accessories by dboitnot
...rt" with a socket for a 20mm compass. the compass is available from amazon here: http://www.amazon.com/gp/product/b00lq2ie2w
thingiverse
free
TAZ 5 Bed Camera Mount by dboitnot
...e included the step file for customization.
for a version which holds the camera higher: http://www.thingiverse.com/thing:1204616
thingiverse
free
Spool Holder for Printrbot Play by dboitnot
...ngled slightly inward to keep the pipe in place.
unfortunately, they're too big to print on the play. i used a lulzbot taz 5.
thingiverse
free
Customizable Wedge Mount - RAM Compatible by dboitnot
...-20 socket-head cap screw.
nb: you will want to avoid over-tightening as it may deform the part and make it difficult to remove.
Quickie
thingiverse
free
Hauptzahnrad Quickie EP10 by bocky
...hauptzahnrad quickie ep10 by bocky
thingiverse
hauptzahnrad quickie ep10
blendswap
free
Rutan Quickie 2
...aircraft corporation founded by tom jewett and gene sheehan. canadian garry legare was involved in the design. (source wikipedia)
thingiverse
free
Command Strip Quickie Hook by TheViralDIY
...command strip quickie hook by theviraldiy
thingiverse
wall hook for the quickie brand brush and dustpan
thingiverse
free
Quicky Bookmarks by mikenoel
...quicky bookmarks by mikenoel
thingiverse
6 simple, quickly printed bookmarks
thingiverse
free
Quicky 65mm by Tarkux
...se
here another sketch i did . a low weight 3d printable frame toothpick style for 11xx 1s and 2s .
https://youtu.be/tts3l34nkbq
thingiverse
free
Stackable Painters Point - Quickie! by AnansiTheArmadillidiidae
...about 1.625" (41 mm) tall and stack nicely for storage.
please let me know if you printed a set and how they worked for you!
thingiverse
free
Retaining Bracket for Quickie P222 Swing-away Hanger by dboitnot
... mate with the quick p222 70 degree swing-away hanger
it may also work with hangers which use the same pin & latch mechanism.
thingiverse
free
Quickie Mach 2 handcycle gps cycling computer bike mount adapter
...ter measures 24 mm.
first test print a couple of millimeters of the part that mounts on your handcycle to check your tolerances.
blendswap
free
Quickie Concept Gun Attempt #1
...and of course my all time favorite.http://www.blendswap.com/blends/view/47497latest change on 2013/09/03, 21:06:58category change
Retaining
turbosquid
$5
retaining wall
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Retain [traffic signal]
...yalty free 3d model retain [traffic sing] for download as max on turbosquid: 3d models for games, architecture, videos. (1196616)
turbosquid
$41
Pins, Clips & Retainers Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Fine tuning retaining mechanism
...anism for download as 3ds, max, ige, obj, fbx, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1254220)
turbosquid
$6
Alfa Romeo 166 sill spoiler retainer clip left side
... 166 sill spoiler retainer clip left side for download as ipt on turbosquid: 3d models for games, architecture, videos. (1301046)
3ddd
$1
Sanderson Pillows Oakwood
... that has been beautifully translated in five colourways to retain the characteristic textures and flecks of the original prints.
3ddd
$1
ocean rocker by jolyon Yates
...cker by jolyon yates
3dsmax , vray obj file included
the mesh retains all the original uvs, allowing for fast material creation.
3ddd
$1
Armchair Fensy by NUBE
...and stool with internal metal frame covered by shape retaining polyurethane foam. black oven painted or black nichel painted...
3d_ocean
$16
Sony Ericsson Xperia S
...y textures, bump maps, opacity maps. custom screen texture, low poly retained so smoothness can be adjusted according to demands.
3ddd
$1
GLASS BARN FILAMENT SCONCE AGED STEEL
...s retain the classic lines and exposed hardware of the originals. designed to showcase the warmth of edison-style filament bulbs.
Swing
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 n280313 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 n280313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing lappset n051113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing 2 n230814 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
Hanger
3d_export
$5
hanger
...hanger
3dexport
hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger coat hanger holder
hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hanger
...hanger
3dexport
old-fashioned hanger of georgia
3ddd
$1
Hanger
...hanger
3ddd
вешалка
classic black hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack peg
hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack sanitary ware
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hall-stand rack hanger
hanger n250711 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Away
3d_export
$5
spirited away
...spirited away
3dexport
turbosquid
$12
Take Away Cup
...yalty free 3d model take away cup for download as 3ds and obj on turbosquid: 3d models for games, architecture, videos. (1324337)
turbosquid
$6
Chinese Take Away
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Worlds Away Faceted Chandelier Pendant
...worlds away faceted chandelier pendant
3ddd
worlds away
производитель: worlds away
артикул: 11884
габариты: 190х160(h)мм
3d_ocean
$4
Coffee Cup Take Away
...for games such as fps / survival / simulation / enviroment / prop, etc. low poly (128 polygons – 123 vertices) 1×1024x1024 png...
turbosquid
$1
Take away Coffee cup
...oyalty free 3d model take away coffee cup for download as obj on turbosquid: 3d models for games, architecture, videos. (1253592)
3ddd
$1
Worlds Away collection
...onti s (д:1526мм х в:635мм)
лампа арт.: windham s (в:1194мм х д:406мм)
декор арт.: carmen glghttp://www.worlds-away.com
3ddd
$1
New Generation "Aways"
...ration room , new generation , aways
dogtas.com
3ddd
$1
New Generation "Aways"
...ration room , new generation , aways
dogtas.com
3ddd
free
New Generation "Aways"
...ration room , new generation , aways
dogtas.com
Bracket
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Bolted
3d_export
$2
bolt
...
bolt - a fastener in the form of a rod with an external thread, usually with a hex head wrench, forming a connection with a nut.
3d_export
$5
bolted ring
...bolted ring
3dexport
bolted ring
3d_export
$5
royal bolt
...royal bolt
3dexport
royal bolt
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1681373)
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1680879)
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1680869)
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1680866)
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1680860)
turbosquid
$10
Bolt
...lty free 3d model bolt for download as max, c4d, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1680480)
turbosquid
$13
bolt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.