Thingiverse
Reptile Cloud XT30 connector mount by ToddF
by Thingiverse
Last crawled date: 4 years, 2 months ago
I prefer my battery connectors to be hard mounted so the battery can be plugged and unplugged with one hand. My original design had the connector mostly below the top plate.
When I made a digital version of this build, I changed the frame standoff height from 35mm to 20mm. There was no room for the connector between the top plate and the vista unit, so it needed to be mounted above the top plate. As in the previous design, this uses M2x12 screws and M2 nuts to clamp the connector.
When I made a digital version of this build, I changed the frame standoff height from 35mm to 20mm. There was no room for the connector between the top plate and the vista unit, so it needed to be mounted above the top plate. As in the previous design, this uses M2x12 screws and M2 nuts to clamp the connector.