Thingiverse
ReplicatorG profiles for Sailfish by whpthomas
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATED Aug, 14 2013
These are my updated profiles for printing with the Replicator 2 using the latest release of ReplicatorG 40 (r16) and Sailfish.
My guide to installing the Sailfish firmware on the Replicator 2/2X can be found here: [thingiverse.com/thing:61022]( http://www.thingiverse.com/thing:61022 "Acceleration Test Shape")
Improvements include:
A 5D pre-prime sequence with slow wipe
100 micron profile with 200 micron first layer
Improved dwindle setting to reduce stringing
340 micro zero fill profile for printing stretchlet bracelets
Material profiles match - use PLA for PLA and ABS for ABS, the only difference is the packing density
An improved zipper
These are my updated profiles for printing with the Replicator 2 using the latest release of ReplicatorG 40 (r16) and Sailfish.
My guide to installing the Sailfish firmware on the Replicator 2/2X can be found here: [thingiverse.com/thing:61022]( http://www.thingiverse.com/thing:61022 "Acceleration Test Shape")
Improvements include:
A 5D pre-prime sequence with slow wipe
100 micron profile with 200 micron first layer
Improved dwindle setting to reduce stringing
340 micro zero fill profile for printing stretchlet bracelets
Material profiles match - use PLA for PLA and ABS for ABS, the only difference is the packing density
An improved zipper
Similar models
thingiverse
free
Acceleration Test Shape - Print Aid by whpthomas
...to run "chmod 755 install-pypy.sh" before you can execute it from the terminal. see the installation guide for details.
thingiverse
free
Makerbot Replicator 2 build profile by nyersa
... of makerbots default 100 micron profile following support removal and mine. the print is: http://www.thingiverse.com/thing:54203
thingiverse
free
BETHnameplate by SteveRiccio
...]
my first "thing" - wanted to make a name plate for my wife for her birthday.
printed in green pla on my replicator 2.
thingiverse
free
Dual Extrusion Quick - Test by Deamos
...0 on my makerbox replicator 1.
this test can be used to quickly verify that all of your offsets are correct for dual extrusion.
thingiverse
free
Nylon Printing Profile for Replicator 2 by whpthomas
...activate to reduce jumps and thus stringing
surface cooling is disabled
see instructions for instillation and print settings.
thingiverse
free
Smart cable clamp by insane78
...rinted at 190 microns, 50% infill honeycomb, with raft (maybe not needed)
print the body using supports!
hope this is useful.
bye
thingiverse
free
Improved Replicator 2 GoPro Mount by Razor2000
... make it a little stronger and quicker to print (rounded corners etc.)
updated version: http://www.thingiverse.com/thing:323426
thingiverse
free
Simplify3D Creator profiles for ABS, PLA and Taulman Nylon 618 by Enginwiz
...d at 215 degrees c.
nylon calibration parts were printed at 235 degrees c.
filament diameter measured 1,75 mm during calibration.
thingiverse
free
Printed on Replicator - 2 - Koch snowflake in 3D by dogger
...n replicator - 2.created from java3d - .x3d, to blender - .stl, to meshlab - smoothing, to replicatorg - scaling and orientation.
thingiverse
free
Profile for printing in NinjaFlex on a Makerbot Replicator2 by gregoware
... tell me !
other details, in french, here : http://www.fabriqueurs.com/test-dimpression-en-ninjaflex-sur-makerbot-replicator-2/
Whpthomas
thingiverse
free
Nozzle cleaning tool by whpthomas
...signed using an acis solid in shark fx/viacad (vc3 file included) so will behave well with makerware, replicatorg and skeinforge.
thingiverse
free
Replicator 2X Extruder Drive Block Upgrade by rmcniff
...(not 2x) upgrade:http://www.thingiverse.com/thing:53125 and on the aesthetics of the whpthomas upgrade:http://www.thingiverse.com/thing:79807 advantages over other drive block upgrades: includes a...
thingiverse
free
Compact 501 Quick Release Plate (Manfrotto/Bogen) by whpthomas
... multiple vendors. the hole in the mount is threaded so the screw will remain in place when the mount is removed from you camera.
thingiverse
free
GPX gcode to x3g converter by whpthomas
... configuration from the command line, or configured using a macro language embedded in the gcode header of the files it converts.
thingiverse
free
LaceR by dan3008
...thingiverse based loosely off of school shoelace badges by whpthomas and using benjamin's stencil factory (i prefer the origional,...
thingiverse
free
Printrbot Simple Metal Tool Holder by LZapata
...from the yath tool holder for replicator 2 from whpthomas you can find it here: http://www.thingiverse.com/thing:38949. the tool holder...
thingiverse
free
Hellraiser Cube Gears by broodrooster
...jamie zawinski), processed by the pla gear kit (by whpthomas. the file xscreensaver-5.36/hacks/glx/lament.c contains the following license text: /*...
thingiverse
free
Replicator 2/2x Pivoted Blower Duct by insane78
...thingiverse i decided to modify original blower duct of whpthomas in order to gain access to the screws under...
thingiverse
free
Picture Frame Badge - customize your own ! by RLazure
...clamp together. the pin tack is a modification of whpthomas#39; design https://www.thingiverse.com/thing:130879 the badge is a 3-1/2" x 2-3/8"...
thingiverse
free
Bonne Retraite - picture frame badge by RLazure
...clamp together. the pin tack is a modification of whpthomas#39; design https://www.thingiverse.com/thing:130879 the badge is a 3-1/2" x 2-3/8"...
Sailfish
3d_export
$59
Sailboat 3D Model
...model 3dexport yacht sailer sail boat ship sailing vessel sailfish craft sea water detailed board barque bark photoreal game...
3d_export
$80
HMS Capitans cabine 3D Model
...sailship brig battleship lineship cannon fregate treasure galley sailing sailfish black pearl caribbean boat sail old hms capitans cabine...
3d_export
$80
HMS downhold 3D Model
...sailship brig battleship lineship cannon fregate treasure galley sailing sailfish black pearl caribbean boat sail old hms downhold 3d...
3d_export
$80
HMS trum 3D Model
...sailship brig battleship lineship cannon fregate treasure galley sailing sailfish black pearl caribbean boat sail old hms trum 3d...
3d_export
$50
HMS wardroom 3D Model
...sailship brig battleship lineship cannon fregate treasure galley sailing sailfish black pearl caribbean boat sail old hms wardroom 3d...
3d_export
$300
Sailfish 3D Model
...sailfish 3d model
3dexport
sailfish
sailfish 3d model fred-13 22384 3dexport
turbosquid
$3
Sailfish
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
Sailfish
...3d model sailfish for download as max, dae, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1603499)
turbosquid
$5
SailFish fin
...alty free 3d model sailfish fin for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1166142)
thingiverse
free
Marlin 2.0.5.3 for CTC Bizer/Dual/Twinmaker W/ Thermistors by abtekk
...boy was i wrong. after flashing a copy of sailfish 2.7, i soon discovered that no custom firmware would...
Replicatorg
thingiverse
free
Nozzle cleaning tool by whpthomas
...(vc3 file included) so will behave well with makerware, replicatorg and...
thingiverse
free
R. Maker - Mark I by Mr_MegaTronic
..."techknight" for the advice on re-orienting the models in replicatorg) also, i would love to know how well this...
thingiverse
free
GPX gcode to x3g converter by whpthomas
...-g command line flag and gcode_flavor option to select makerbot/replicatorg interpretation of m109. gpx can be configured to perform...
thingiverse
free
Toothpick for Swiss Army Knife by NickAmes
...5 cm long. the gcode was generated using the replicatorg skeinforge default settings. update july 12 2009: changed name...
thingiverse
free
22 minute face shield by WillandMrData2
...printed assembled in 22 minutes. "high speed settings in replicatorgquot; fits on makerbot replicator build plate. just under 250...
thingiverse
free
ReplicatorG 040 for Windows or Mac by Davik
...pplication.
===============================or===================================google also keeps an archive of this program here
thingiverse
free
FlashForge New Creator Pro - Bed Extender - Sized for 8 x 10 Plexiglass by Timetoprint00
...of the bed. if you are using slic3r or replicatorg the nozzle’s starting position is at the front left-hand...
thingiverse
free
Jellyfish Mod Resized for ease of Assembly by Timetoprint00
...new creator pro. the gcode was created using the replicatorg sailfish software and pypy. we really enjoyed making this...
thingiverse
free
QX06 Pegboard Madness Ashtray by Jonquilmusic
...exploration. this ashtray stl was sliced and coded using replicatorg employing 2 shells (3 total) using pla. flashforge creator...
thingiverse
free
QX07 A19" Professional Rackmount Brackets by Jonquilmusic
...applications:https://en.wikipedia.org/wiki/19-inch_rack the rackmount stl was sliced and coded using replicatorg employing 2 shells (3 total) using pla. flashforge creator...
Profiles
3d_ocean
$6
Low Profile Radiator
...low profile radiator
3docean
heat heater hot pipe radiator temperature thermostat warm
a low profile version of the radiator
3ddd
$1
Roche Bobois PROFIL Dining Table
... обеденный , круглый
высота 750мм
диаметр 1300мм
материал стекло
3ddd
$1
doors moon design Giuseppe Bavuso
...e project, characterised by its exclusive “s” shaped profile that removes the edging profile where the door panel meets the jamb.
3ddd
$1
Davidson Lexington Table
... easy change or setup.
object at 0.0.0, clean and light scene.
the archive contains the obj & 3ds file & more previews.
3ddd
$1
Giorgetti Tycoon Desk
... model for easy change or setup.
object at 0.0.0, clean and light scene.
the archive contains the fbx file & more previews.
3ddd
$1
Maxalto Lutetia Sofa
...blanket stitching lend a defining touch that delineates the profiles in the same tones as the upholstery width 275...
3ddd
$1
Giorgetti Tycoon Desk
... model for easy change or setup.
object at 0.0.0, clean and light scene.
the archive contains the fbx file & more previews.
3ddd
$1
Deltalight Banner Profile
...deltalight banner profile
3ddd
deltalight
подробная информация www.deltalight.com
3ddd
$1
Elena Rohner - Munio Vases
...today she is widely considered one of the strongest profiles on the contemporary european design scene and her work...
3ddd
$1
Profil Doors
...
3ddd
profil doors , дверь
двери и наличник profil doors модели 7х и 15х, цвет капучино.