Thingiverse
Replacement Timing Belt Storage Container by cgi
by Thingiverse
Last crawled date: 5 years, 9 months ago
This was made as spool to store a spare timing belt.
The Fusion 360 file is parametrized (more or less) completely.
You can enter belt length, width, thickness and so on and the model will adapt (within reason).
Before you change parameters, make sure to make either to top or the bottom part invisible, or Fusion 360 might fuse them (the 2 parts are touching in the model on the bajonet lock stopper).
The STL files are calculated for belts 6mm wide, 1.77mm thick and 4000mm/5100mm long.
The Fusion 360 file is parametrized (more or less) completely.
You can enter belt length, width, thickness and so on and the model will adapt (within reason).
Before you change parameters, make sure to make either to top or the bottom part invisible, or Fusion 360 might fuse them (the 2 parts are touching in the model on the bajonet lock stopper).
The STL files are calculated for belts 6mm wide, 1.77mm thick and 4000mm/5100mm long.