Thingiverse
Replacement Dustboot for X-carve Suckit by sd_tom
by Thingiverse
Last crawled date: 4 years, 5 months ago
I printed it in PETG @ 40% infill, fast honeycomb pattern. This is after I cracked the original after hitting a clamp. This is an approximation of the dust boot purchased in Feb 2018 for a stock X-Carve.
Shortcomings: I haven't put in holes for the dust hole insert. I am leaving it off for the moment as i'm using taller brushes which precludes its use. I may revise this later to have a sunken dust cover. As you can see, I also made it 1 piece as I only had to solve my geometry.
CAD shared on Fusion360 if you need to tweak ithttps://a360.co/2pMxzbF
Shortcomings: I haven't put in holes for the dust hole insert. I am leaving it off for the moment as i'm using taller brushes which precludes its use. I may revise this later to have a sunken dust cover. As you can see, I also made it 1 piece as I only had to solve my geometry.
CAD shared on Fusion360 if you need to tweak ithttps://a360.co/2pMxzbF