Thingiverse
Repeating mini crossbow by DIYPark
by Thingiverse
Last crawled date: 4 years, 11 months ago
How to make - https://youtu.be/N4zxyb1klb0
Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
This model is optimized for 0.4mm nozzle.
It would be cumbersome, but please print out the parts one by one.
Sometimes people ask me to send a model source. I politely refuse.
Your eyes are precious. You must wear safety goggles for safety.
The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
The consumption of filament is about 8m. PLA, and ABS filaments may be used.
Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
This model is optimized for 0.4mm nozzle.
It would be cumbersome, but please print out the parts one by one.
Sometimes people ask me to send a model source. I politely refuse.
Your eyes are precious. You must wear safety goggles for safety.
The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
The consumption of filament is about 8m. PLA, and ABS filaments may be used.