Renault Twingo (2014-) storage under rearseats by MoMaHo

Last crawled date: 2 years, 11 months ago

I designed this for my 2021 Renault Twingo ZE, which originally wasn't equipped with a Flexicase storage under the rearseats. Since this model has not been changed from 2014 till today I guess this print should fit.
Here's what you need:
2x Outer part (L+R)
2x middle part (L+R)

2x Suitable storage net ("ProPlus 302x169mm" - with 5 mounting holes each)

10x M4x16mm screw (I recommend black DIN912)
10x M4 nut (I recommend self-locking DIN985)

2x M4 wide washer (DIN 9021) or suitable piece of metal
--> For mounting the net to the printed parts

6x M5x16 flat head screw (I recommend black plastic screws with flat head like used in automotive applications)
6x M5 wing nut or knurled nut (alternative may be normal nut+washer; I recommend using plastic nuts and mounting without tools)
Optional: Pieces of soft foam rubber stripes between metal parts of the car and the plastic parts (leaves you some tolerances and reduces the stress on the plastic parts)
--> For mounting the assembly to the car (3 holes should be already there)
Since the outer part is quite long and should be printed upward I designed a second version which is easier to place and shorter.
However I recommend printing upward (see pic) so the part gets a better look and a better stability.