Thingiverse
Removable Bed Leveling Probes for Anycubic Kossel Linear V3 (with microswitch without lever) by unimatrix099
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a remix of the great removable probe https://www.thingiverse.com/thing:1976680 but after seeing the video from Thomas Sanladerer https://www.youtube.com/watch?v=il9bNWn66BY&t=642s I thought of removing the microswitch lever. I've used a microswitch with the lever removed and moved it so that the switch will be touching in the same place as V2 For me the standard deviation improved from 0.035 (version 2 with lever) to 0.002 (without the lever).
Tip: to quickly find the height of the probe, set the Z probe offset to 0 -> "M851 Z0" and then start a M48 - Probe Accuracy Test -> "M48 V4" and it will give you the height of the probe (assuming the printer height is accurate, I mean Z=0 will be at the bed level, if it's off then M48 will not provide useful values) For example, after M48 is finished and the mean value is 24.4 then the offset is set with command "M851 Z-24.4" - the offset is minus the mean value
Tip: to quickly find the height of the probe, set the Z probe offset to 0 -> "M851 Z0" and then start a M48 - Probe Accuracy Test -> "M48 V4" and it will give you the height of the probe (assuming the printer height is accurate, I mean Z=0 will be at the bed level, if it's off then M48 will not provide useful values) For example, after M48 is finished and the mean value is 24.4 then the offset is set with command "M851 Z-24.4" - the offset is minus the mean value