Thingiverse
Remount drop bar remote to southpaw adapter by teikjoon
by Thingiverse
Last crawled date: 4 years, 5 months ago
This small handlebar extension allows you to mount your dropper remote "southpaw" style (horizontally) instead of vertically. Just in case you're like me and got the wrong type of remote for your mountain bike.
There are two choices for the stub, one is centered on the bracket and one is offset further away. I am using the offset stub, but I've uploaded the centered stub as well, in case its useful to someone.
Hardware needed to install :
2x M3x25mm bolts (minimum length)
4x washers
2x M3 nuts (locknuts if you can get them)
Print with PETG or ABS, shouldn't need supports or rafts.
There are two choices for the stub, one is centered on the bracket and one is offset further away. I am using the offset stub, but I've uploaded the centered stub as well, in case its useful to someone.
Hardware needed to install :
2x M3x25mm bolts (minimum length)
4x washers
2x M3 nuts (locknuts if you can get them)
Print with PETG or ABS, shouldn't need supports or rafts.