Thingiverse
Remote control caddy by CosmicBeyond
by Thingiverse
Last crawled date: 4 years, 7 months ago
Holds up to five remotes of various sizes.
Color printed in the pictures was called Natural (ABS) which I thought was going to turn out somewhat clear-ish/translucent based on experience with a different brand, although that other brand was PLA (which I would recommend so that it's easier to tell the remotes apart), but obviously still works either way.
Used:
5% infill
.3 primary
Two perimeter layers
Three top and bottom layers
Dimensions:
5 3/4" width + depth (146.05mm)
3 1/2" height (88.90mm)
Also included a large size
7" width + depth (177.80)
4" height (101.60)
Color printed in the pictures was called Natural (ABS) which I thought was going to turn out somewhat clear-ish/translucent based on experience with a different brand, although that other brand was PLA (which I would recommend so that it's easier to tell the remotes apart), but obviously still works either way.
Used:
5% infill
.3 primary
Two perimeter layers
Three top and bottom layers
Dimensions:
5 3/4" width + depth (146.05mm)
3 1/2" height (88.90mm)
Also included a large size
7" width + depth (177.80)
4" height (101.60)