Thingiverse
Remixed Protective Visor by 3DVerkstan HINGED FOR SMALL PRINTERS 135MM BY 125MM by Prylolizer
by Thingiverse
Last crawled date: 5 years, 6 months ago
Remixed this model for those who have a small 3D printer. when rotated near 45 degrees it will fit in 135mm by 125mm box. This is the start and is a little rough. I will work on making it look a little more streamline in the coming days.
Was printed with a .4 nozzle at .2 layer height and took roughly 2 hours. It is an older $150 china kit printer so im sure it can be printed faster. the original design was made for fast printing with a .8mm nozzle in around 20 min. With a .8 mm this should be able to be printed in just over 30 min.
Original Designhttps://www.youmagine.com/designs/protective-visor-by-3dverkstan
Was printed with a .4 nozzle at .2 layer height and took roughly 2 hours. It is an older $150 china kit printer so im sure it can be printed faster. the original design was made for fast printing with a .8mm nozzle in around 20 min. With a .8 mm this should be able to be printed in just over 30 min.
Original Designhttps://www.youmagine.com/designs/protective-visor-by-3dverkstan