Thingiverse
Remixed IKEA Lack Grommet by thebeetleuk; splits and shortens and stuff
by Thingiverse
Last crawled date: 5 years, 5 months ago
Thanks to thebeetleuk for the original set! I really appreciate the work.
This is a remix for my desires. In the listed files, the grommets are shortened to 1"/25mm deep, save one that is deeper. This deeper one is intended to hold a cord plug.
There are some special caps.
There is a split grommet set that uses two 3 X 8mm or longer bolts. It's so one may place a cord that has a plug greater than about 1", but not larger than 1 3/8" (the diameter of the hole saw that I used.
This is a remix for my desires. In the listed files, the grommets are shortened to 1"/25mm deep, save one that is deeper. This deeper one is intended to hold a cord plug.
There are some special caps.
There is a split grommet set that uses two 3 X 8mm or longer bolts. It's so one may place a cord that has a plug greater than about 1", but not larger than 1 3/8" (the diameter of the hole saw that I used.