Thingiverse
remixed for ix12 and 2s lipo by hulabaloo
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a remix of the dx9 battery cover for the Spektrum ix12 radio. It's been scaled like 101-102% and the hole removed and a battery holder added for the HobbyKing turnigy 2s 1800mah lipo. To power a crossfire module on the ix12.
I added some foam to the backside near the center to keep the tab tight against the radio. Else after a while that part of the cover curves and it just wants to slide out. Putting some outward pressure on it with foam or the soft velcro side helps keep the tab pressing against the "locking section".
I added some foam to the backside near the center to keep the tab tight against the radio. Else after a while that part of the cover curves and it just wants to slide out. Putting some outward pressure on it with foam or the soft velcro side helps keep the tab pressing against the "locking section".
Similar models
grabcad
free
LiPo Battery 2S 3000mAh by GAONENG
...lipo battery 2s 3000mah by gaoneng
grabcad
lipo battery that i use to charge my radio transmitter.
thingiverse
free
Dual 2S Lipo Battery Holder by kevinaangstadt
...angstadt
thingiverse
this will hold two, 2s lipo batteries. use some velcro tape through the top holes to secure the batteries.
thingiverse
free
4 x 2s Lipo Battery Holder by StringyMcStringface
...4 x 2s lipo battery holder by stringymcstringface
thingiverse
lipo battery holder for up to 4 2s.
thingiverse
free
XT60 and XT30 Battery Caps by twistedartwork
...added a small tab at the top to be able to grab them easier. they are modeled so that the can be printed upright without support.
thingiverse
free
Reely battery cover with Balancer plug (2s and 3s) holder by _MirTl_
...eckel" only for lipo with 2s balancer plug!
file "akkudeckel 2s and 3s balancer plug" for 2s and 3s balancer plug.
thingiverse
free
XT90 Battery Cap by PokerPilot805
...female) side. for added functionality, print them in red and green to keep track of which packs are charged and which are spent!
thingiverse
free
XT60 Battery Cap by PokerPilot805
...(female) side. for added functionality, print them in red and green to keep track of which packs are charged and which are spent!
thingiverse
free
Microsoft Bluetooth Notebook Mouse 5000 Battery Cover strong remix by jerryciano
...osoft bluetooth notebook mouse 5000 designed by targeos with more strong tabs added.
to be printed with supports under the tabs.
thingiverse
free
FlightPower Eon-X RX 2s Lipo 2100mAh Battery Holder by RaceMechaniX
... battery holder by racemechanix
thingiverse
battery holder for a flightpower 2100mah 2s lipo battery used as a receiver battery.
grabcad
free
GForce 20C 1000mAh 2S 7.4V LiPO Battery
... 1000mah 2s 7.4v lipo battery
grabcad
gforce 20c 1000mah 2s 7.4v lipo battery
http://www.valuehobby.com/20c-1000mah-2s-jst.html
Ix12
thingiverse
free
IX12 Strap Protection by mmoreto
...ix12 strap protection by mmoreto
thingiverse
ix12 strap protection
thingiverse
free
Spektrum iX12 Support For Immersion ezUHF by mmoreto
...ort for immersion ezuhf by mmoreto
thingiverse
this support was designed to facilitate installation and removal of ezuhf on ix12
thingiverse
free
TBS Tracer Nano Mount for Spektrum iX12 by DownRight
...tbs tracer nano mount for spektrum ix12 by downright
thingiverse
this is a mount for the tbs tracer nano on a spektrum ix12.
thingiverse
free
Spektrum iX12 Rotor Riot Gimbal Guards by CoppertopFPV
...spektrum ix12 rotor riot gimbal guards by coppertopfpv
thingiverse
gimbal guards for spektrum ix12 transmitter radio
thingiverse
free
iX12 Crossfire mount offset by alancastell
...ix12 crossfire mount offset by alancastell
thingiverse
this was a remix of the spektrum mount to make it offset.
thingiverse
free
Spektrum IX12 Senderpult Transmitter tray
...y dismounted with the 4 butterfly screws and take place easely in the tramistter case from spektrum for the ix12 (ref : spm6725)
thingiverse
free
Spektrum iX12 Stick and Switch protectors by alancastell
...ticks or switches. added a screen cover to protect the touch screen from scratches. last mod added the covers for the switches.
thingiverse
free
iX12 Tracer Nano - Crossfire QuickSwap Adapter by DownRight
...mr12000-csrf-mount-v2.stl
original tracer nano mount here: https://www.thingiverse.com/thing:4645763
https://youtu.be/jcxwsyrg5-a
thingiverse
free
Spektrum iX12 Screen Protector Template
...t a generic screen protector, cut it out on my laser cutter and i was done. simple, cheap and easily replaceable whenever i want.
Hulabaloo
thingiverse
free
cmmg bolt case wider by hulabaloo
...he front of the bolt. i have not printed this, i fixed mine by heating it up and shoving the bolt in. but this one should work.
thingiverse
free
HGLRC 145mm TPU parts by hulabaloo
... shark fin with sma mount. antenna tubes (long part holds forever tubes, short part goes on the standoff), and wire protectors.
thingiverse
free
betafpv naked mount with cam and pivot and bumper by hulabaloo
...er by hulabaloo
thingiverse
modification to add a micro cam and a pivot. also a bumper (insert a 20-30mm standoff in the front)
thingiverse
free
Airsoft trilug adapter thread tester by hulabaloo
... 1 -1/8 x 28 threads.
0.15 layer height or better
avoid supports on the threads!
ideally test at 100% infill and 30% infill both.
thingiverse
free
NanoLongRange Remix-1s+2s, reversable, carbon spars, stronger cam mount-(hulabaloo+bbbenji) by lethxL
...t issues.. vtx in tight space i believe), and his 2s battery holder file for convenience.
supports on the battery holder and cage
thingiverse
free
airsoft 14mm LH threaded 3 lug by hulabaloo
... barrel and 1 that has an 8mm bore for the end of a barrel so a bb just passes through. i printed using carbon petg 100% infill.
thingiverse
free
ar magwell screwed-in retainers by hulabaloo
...
i added a file on the right for the type of trigger guards that screw in instead of use a roll pin (aero precision for example).
thingiverse
free
sd card holder under battery cover for ix12 by hulabaloo
...ers (total 2mm) of double sided tape. if you screw it up, it will get ruined when removing, but that's ok it prints quickly.
thingiverse
free
Pagoda Stubby TPU case by hulabaloo
...printer: prusa mk3
filament: sainsmart tpu
infill: 30% (the walls will be solid).
orientation: cone up, like an ice cream cone
2S
turbosquid
$29
Mobile BE 2S
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$22
RR03 Sofa 2S
...rr03 sofa 2s
designconnected
mdf italia rr03 sofa 2s 2-seater computer generated 3d model. designed by robin rizzini.
3d_export
$60
lockheed u-2s dragon lady
...sors, and addition of a gps receiver; 31 units converted. u-2s has the senior span/spur communications suite in a dorsal radome.
3ddd
$1
Cremasco 393-2S-VE3
...см.:95
количество ламп:2
мощность ламп в вт:100
тип ламп:е-27 лампа накаливания
производитель:cremasco (италия)
полигонов 148 358
3d_export
$11
pendant lamp ac134 2s int
...p20 product description diameter: 12 cm height: 28 cm color: blue, (stefanni), transparent material: glass, steel weight: 0.75 kg
3ddd
$1
Люстра барная
...люстра барная 3ddd люстра барная. металл + матое стекло. 2s max 2008 +...
3ddd
$1
Сremasco 434
...сremasco 434 3ddd cremasco подвес cremasco portico 434/2scon-tr(45) материалы corona render , материалы присутствуют. размеры: высота -...
3ddd
$1
Тумбочка под ТВ
...3ddd тумба тумбочка под тв гербор (украина) ларго prtv 2s4-15 венге с еткстурами. на сайте...
3ddd
$1
Набор мебели Art line
...h061-3 d061-6h bf061-3 bf080 b026a b026 c036-1 t035-1 s031-1s s031-2s ...
3d_export
$70
mitshubishi t-2
...the basis of the mitsubishi f-1 military aircraft. all t-2s were retired by 2006. here come three versions of...
Lipo
thingiverse
free
Soporte lipo
...soporte lipo
thingiverse
customizable lipo stand
thingiverse
free
Copterframe Lipo Adapter for bigger Lipos by heckmic
...o adapter for bigger lipos by heckmic
thingiverse
copterframe lipo adapter for bigger lipos
look at michael-heck.net for more.
thingiverse
free
Testeur LIPO / LIPO Tester
...testeur lipo / lipo tester
thingiverse
salut a tous ceux qui sont sur cette page !
thingiverse
free
Lipo Taranis
...lipo taranis
thingiverse
pour lipo gn3 taranis
thingiverse
free
Harvest lipo buckle
...harvest lipo buckle
thingiverse
tpu lipo belt. keep out the frame your lipo straps.
thingiverse
free
lipo box by snoupypop
...lipo box by snoupypop
thingiverse
pour lipo 25c 1s
thingiverse
free
Lipo Stand by Cagatay
...lipo stand by cagatay
thingiverse
6x (12x35mm) lipo compartment
thingiverse
free
Lipo cover for bottom slung lipos by Zugara
...s and battery strap width of 20mm. length of 75mm x 30mm wide, 17mm height.
stl is for hollow print, so adjust yours accordingly.
thingiverse
free
boite lipo by micma
...boite lipo by micma
thingiverse
boite pour accu lipo tattu 850mha
thingiverse
free
LiPo Holder for Taranis
... taranis
thingiverse
this is my lipo holder for taranis radios. i use it with 850 mah lipo's, but others may also work fine.
Remixed
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...ture/black, nature/oak, remix 133/grey, remix 183/black, remix 643/dusty red, black silk leather/black, cognac silk leather/black
3ddd
$1
Barovier&Toso 7190-7195
...лочнай люстра фабрики barovier&toso;, коллекция manhattan remix, артикул 7190-7195.
размеры в inches: 39" 1/2wх26"h
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixed no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...bj .mb .lwo .fbx .c4d .3ds - htc one mini 2 amber gold 3d model, royalty free license available, instant download after purchase.