Thingiverse
Reloading Powder Drop Funnel Set (223, 260rem, 6.5 creedmoor, 308 Winchester, 300 Winmag)
by Thingiverse
Last crawled date: 5 years, 3 months ago
Modified Zapset's wonderful drop funnels for more calibers my friends and I load for.
Allows for better packing of powder to alleviate crunchy issues of compressed loads.
Modified from the original design with pyramid funnels for a little more stiffness.
New
223rem
6.5 Creedmoor
300 Win Mag
and modified the original 260rem and 308win to add a little more length when sitting on a case.
Print vase mode 0 layers top and bottom. I go with 0.5 width on a 0.4 nozzle at 0.3 first layer with 3mm brim and 0.12 after that. Slow, low fan, and hot to get good layer adhesion. I added quick test files to make sure your machine and extrusion width will work ok.
I may add 7rem mag and 338Lapua later if my friends like these and will give me a piece of brass to check against.
Allows for better packing of powder to alleviate crunchy issues of compressed loads.
Modified from the original design with pyramid funnels for a little more stiffness.
New
223rem
6.5 Creedmoor
300 Win Mag
and modified the original 260rem and 308win to add a little more length when sitting on a case.
Print vase mode 0 layers top and bottom. I go with 0.5 width on a 0.4 nozzle at 0.3 first layer with 3mm brim and 0.12 after that. Slow, low fan, and hot to get good layer adhesion. I added quick test files to make sure your machine and extrusion width will work ok.
I may add 7rem mag and 338Lapua later if my friends like these and will give me a piece of brass to check against.