Thingiverse
Refrigerator Filter Mock: EDR2RXD1 by varnerrants
by Thingiverse
Last crawled date: 5 years, 6 months ago
A very rough mock for an EDR2RXD1 sized refrigerator filter, suitable to silence the 'replace filter' light on the fridge.
My refrigerator is fed water from a reverse osmosis filter system, so I have zero need for the inline filter. The red 'replace filter' light was driving me crazy, so I threw together this rough mockup to fit into the spot and hold the switch in the correct position.
The attached photos show an earlier (shorter) version than the STL and SCAD current is set to. The stuff uploaded here should fit nicely into the filter cradle you see in the photo.
My refrigerator is fed water from a reverse osmosis filter system, so I have zero need for the inline filter. The red 'replace filter' light was driving me crazy, so I threw together this rough mockup to fit into the spot and hold the switch in the correct position.
The attached photos show an earlier (shorter) version than the STL and SCAD current is set to. The stuff uploaded here should fit nicely into the filter cradle you see in the photo.