REDHARBINGER R-COVER

Last crawled date: 1 year, 11 months ago

This is My entry for https://grabcad.com/challenges/redharbinger-reservoir-cover-design-challenge
The stainless steel reservoir tank cover for a computer liquid-cooling system

Inspired by a simple square of connected with little modified in the corners. The point is the 22mm circle in the main of cutting loop. Where it can be left blank or filled with red harbinger logo. But size of the logo will be very small, I think it became a unique. [ I don't know how the other thinks :) ]

My design's has 2 differences model of cuts in 3 different length of reservoir tubes, so all of them have the same number of cutting loops. And the details are:

1. 100mm, contains 16 cutting loops, with 4 main circles. The basic form of cuts from all of reservoir, 10mm distance between each cuts with the edge.

2. 200mm, contains 16 cutting loops, with 8 main circles. Modified from the basic form of cuts in length, in connecting from cut to cut, and it has face-to-face cutting loops ( mirrored )

3. 350mm, contains 16 cutting loops, with 8 main circles. Have the same cutting loops like the 200mm reservoir. The cuts are modified to fit with the length of the reservoir. 20mm distance between each cuts with the edge.

I want to design as simple as I can, but has a unique. Of course originally by me, and I try to closely fit with the brand.

Thanks for this challenge, and thanks for looking to my project.