Thingiverse
RedCat Ground Pounder Spring-Perch
by Thingiverse
Last crawled date: 5 years, 7 months ago
The Spring-Perch for a RedCat Ground Pounder comes as part of BS702-050GM.
I've got my Ground Pounder set up to be as scale realistic as possible and keep the shocks very "bouncy". The stock spring-perch sits very loose on the base and after losing the 3rd one and not wanting to order a full replacement shock absorber pair, I decided to make one.
It is a VERY tight fit so that I stop losing them.
I made the center hole slightly too small based on my measurements and used a needle-nose pliers to spread the perch and slide it down on the base. Its not going anywhere now.
I've got my Ground Pounder set up to be as scale realistic as possible and keep the shocks very "bouncy". The stock spring-perch sits very loose on the base and after losing the 3rd one and not wanting to order a full replacement shock absorber pair, I decided to make one.
It is a VERY tight fit so that I stop losing them.
I made the center hole slightly too small based on my measurements and used a needle-nose pliers to spread the perch and slide it down on the base. Its not going anywhere now.