Thingiverse
Redcat Gen8 by Ascorgie
by Thingiverse
Last crawled date: 5 years, 8 months ago
Center mounted servo bracket for Redcat Gen8 Scout. I was too cheap to go with an aluminum one, so I worked this one up myself.
Included are standard bumper height and raised bumper height models, pick your flavor!
During installation, screws may have to be loosened up farther on the frame rails to allow them to spread enough to insert the piece. No additional hardware is needed.
I've had success with it, since i don't bash too hard, and have the stock motor and a 2S LiPo. If you've got more power in your rig, your mileage may vary.
Included are standard bumper height and raised bumper height models, pick your flavor!
During installation, screws may have to be loosened up farther on the frame rails to allow them to spread enough to insert the piece. No additional hardware is needed.
I've had success with it, since i don't bash too hard, and have the stock motor and a 2S LiPo. If you've got more power in your rig, your mileage may vary.